$107.65 $134.56
Decade Deck Paint is a unique combination of advanced resin technology and exceptionally high quality raw materials. It creates an extraordinarily tenacious bond flexible enough to expand and contract with wood subject to extremes in weather, intense UV, and pool chemicals. Perfect for extreme climates because it does not become brittle in cold weather or soften in high heat. Out performs traditional old-school deck paints in every significant performance category. It is eco-friendly, low odor and produces a nontoxic finish. One gallon covers 150-200 square feet. Minimum of two coats required. All applications will require sanding. See Product Data Sheet for further details. Available in gallon and five gallon, satin finish.
INTENDED USE: A super-duty coating product for decks.
SURFACES: Pine, fir, redwood, cedar and many other wood species. Suitable for use on pressure treated and synthetic deck materials. Acceptable for use on wooden structures.
USES: Wood decks, stairs, ramps, pool decks, handrails, fences and most any architectural wooden structure.
THINNER: Water.
APPLICATION: Apply a minimum of two coats by roller-coat or spray.
$213.40 $266.75
Aquapoxy is a new generation catalyst-cured epoxy floor finish that produces excellent results without harming you or the environment. And it’s tough! Recently chosen by 7-11 Stores (world’s largest retail chain) for use in all new construction. Utilizes breathable resin technology to produce an exceptionally hard, durable, surface tolerant finish. Adhesion, chemical resistance, hardness and long term durability are all impressive! This unique combination of environmental and performance properties make it a favorite with architects and property managers. Acceptable for use where heavy traffic, corrosive chemicals, impacts and abrasions are present. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers 200-250 square feet per gallon. Apply one or two coats as desired. Two coats recommended in H-D and commercial applications.
INTENDED USE: A super-duty concrete coating for floors. Primarily for interior use but may be used outdoors.
SURFACES: Concrete, tile, VCT, masonry, plaster, fiberglass, synthetic materials.
USES: Commercial industrial use, hangars, commercial kitchens, retail, bathrooms, parking garages, concrete sealer and garage floor coatings. Approved for food service.
PRIMER: None required on concrete and tile. Glazed tile, linoleum & fiberglass use TS-664.
THINNER: Water.
APPLICATION: Roll or spray.
NOT RECOMMENDED: For wooden surfaces.
$145.49 $181.86
Aquapoxy II Clear produces a durable epoxy finish without the hassle of mixing two components. Like original Aquapoxy (TS-905) it is low VOC, nontoxic and environmentally friendly - but now easier to use! Adhesion, chemical resistance, hardness, long term durability and are ease of use are all excellent. It is acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. It utilizes breathable resin technology to produce a surface tolerant finish. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. It is self-priming and may be applied over any existing coating. Covers up to 250-300 square feet per gallon. Two coats required. Finish is high gloss.
INTENDED USE: Commercial grade finish coating for concrete and tile floors. Interior / exterior use.
SURFACES: Concrete, masonry, plaster, stucco, porous tile & VCT.
USES: Warehouses, driveways, restaurants, hospitals, laundry rooms, hangars, retail spaces and basements. Approved for food service.
THINNER: Water.
PRIMER: Self-priming in two or more coats.
APPLICATION: Brush, roll or spray.
NOT RECOMMENDED: Commercial or residential floor application with vehicle traffic. Use Aquapoxy TS-905 2-part water-base epoxy.
$48.46 $60.59
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
$73.69 $92.12
Supreme Urethane is our most durable product. A super-duty two-component aliphatic acrylic polyurethane finish coating durable enough for the harshest environment and high abuse areas. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, flexibity, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-605 Thinner.
APPLICATION: Brush, roll or spray.