TS-101 Leveling Thinner
$18.48
-
Leveling Thinner is a proprietary blend of solvents that improves the viscosity leveling properties and dry and cure times of paint and coating products. Enhances the application of paint. Includes effective conditioning and drying agents. Cleans spills and tools after application. Use only where recommended for best results.
SAFETY INFORMATION REQUEST FORM -
- Improves the viscosity and leveling properties of paint and coating products.
- Use to clean up tools and spills.
- Improves dry and cure times.
-
INTENDED USE: Use Leveling Thinner to thin and condition paint and coating products where recommended.
CLEAN UP: Use to clean up tools and spills.
RECOMMENDATIONS: Use with TS-100, TS-188, TS-200 & TS-780.
Leveling Thinner is a proprietary blend of solvents that improves the viscosity leveling properties and dry and cure times of paint and coating products. Enhances the application of paint. Includes effective conditioning and drying agents. Cleans spills and tools after application. Use only where recommended for best results.
Related Items
Etching Primer - Exterior Marine Phenolic Primer
$47.00 $58.75
-
Etching Primer (SM-664D) is a fast drying high solid content primer that provides excellent adhesion, high build, excellent sandability and protective qualities over a wide variety of substrates without mixing multiple components. It creates a virtually unbreakable chemical bond to whatever it has been applied to which allows it to be used almost anywhere and most any application! Etching Primer should be your first choice on fiberglass, wood, and aluminum. Finish coats may be applied directly over it without the worry of lifting or wrinkling.
SAFETY INFORMATION REQUEST FORM - Perfect Primer for Trim, Shutters, Fences, Windows, Floors, Decks, Exterior Furniture, Fascia, Doors, Garage Doors, Sheds, Mailboxes
- High Performance Phenolic Etching Primer
- Tremendous Adhesion
- High Build & Self-Leveling
- Excellent Sandability
- Use on Steel, Wood, Masonry, Aluminum & Fiberglass
- Great Coverage & Hiding
- Great Recoatability - dries fast
Etching Primer (SM-664D) is a fast drying high solid content primer that provides excellent adhesion, high build, excellent sandability and protective qualities over a wide variety of substrates without mixing multiple components. It creates a virtually unbreakable chemical bond to whatever it has been applied to which allows it to be used almost anywhere and most any application! Etching Primer should be your first choice on fiberglass, wood, and aluminum. Finish coats may be applied directly over it without the worry of lifting or wrinkling.
Coal Tar Epoxy - 1 Gallon Kit
$74.95 $99.68
-
Coal Tar Epoxy Primer is a heavy duty high build epoxy primer. Prevents rust and corrosion, has excellent adhesion & abrasion resistance, and Is recommended for saltwater immersion service. Conforms with U.S. Corp of Engineer - C-200 specification.
Perfect for commercial marine, yacht & industrial use.
SAFETY INFORMATION REQUEST FORM FAQ -
- Heavy Duty High Build Epoxy Primer - 4:1 Mix
- Prevents Rust and Corrosion
- Excellent Adhesion & Abrasion Resistance
- Heavy Duty 4:1 Mix
- Recommended for Saltwater Immersion Service
- Conforms with U.S. Corp of Engineer - C-200 specification
- Perfect for Commercial Marine, Yacht & Industrial Use
-
- SUGGESTED USES: Prevention of rust & corrosion
- COLORS: Black
- FINISH: Matte
- VEHICLE TYPE: Epoxy Resin, Polyamide Resin, Coal Tar Pitch
- SOLVENT TYPE: Xylene
- VOC: 175 grams / liter
- SOLIDS BY VOLUME: 80% (reacted)
- WEIGHT PER GALLON: 11 lbs. per gallon
- RECOMMENDED DRY FILM: 10.0 mils
- COVERAGE: Theoretical coverage of 10 mils dry is 128 square feet per gallon. Material losses during mixing and application will vary and must be taken into consideration.
- POT LIFE: 75 degrees F - 3-4 hours, lower at higher temperatures
- AVERAGE DRY TIME 75°F: Dries to touch in 5-6 hours. Can recoat in 5 hours to 20 hours. Allow 5 hours minimum before recoating with antifouling.
- RECOMMENDED REDUCER: Reduce with 974 Reducer as needed for proper flow and performance, 10% maximum.
- RECOMMENDED CLEAN UP: 974 Reducer or Xylene
- RECOMMENDED FINISH: Ablative or Epoxy Hard antifoulings
- SURFACE PREPARATION: BARE FIBERGLASS: Degrease by wiping with a rag soaked in 973 Dewaxer. Sand with 80 grade (grit) paper. Remove sanding residue. Wipe with 973 Dewaxer.
- Over Coal Tar Epoxy: Abrade surface by sweep blast or 36 grit sanding.
- BARE METAL: Surface should be blasted to bright metal. Remove all blast or sanding residue using a clean air line and sweeping with a clean brush or broom. Vacuum clean for best results. Apply primer within 1 hour of metal preparation. If blasting is not possible (or if more than 2 hours has passed since blasting) sand or grind with coarse 36-60 grit discs. Remove sanding dust.
- APPLICATION: Final Dry Thickness of 20 mils. This usually takes 2 coats, but the amount of paint is more important than the number of coats.
- Airless Spray Pressure: 165 bar/2400 psi Tip Size: 0.44-0.53 mm/17-21 thou. Conventional Spray Pressure Pot: Pressure: 3.44-4.47 bar/50-65 psi (gun pressure); 10-15 psi (pot pressure). Tip Size: 1.5-1.8 mm/60-70 thou.
- Brush Use a natural bristle brush.
- Roller Use a 3/8” - 1/2” nap solvent resistant roller.
- POT LIFE: 5 hours
- LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 50F or above 95F. Do not put over 1 part paints.
- SHELF LIFE: Minimum 36 months
- INDUCTION TIME: 20-30 minutes
- MIXING: Mix 4 parts 8003 Part A Base and 1 part 8003 Part B Activator by volume at the specified ratio. Mix only as much as you can use in 2 hours. Mix small amounts until application technique is developed.
- PACKAGE: 2 Part kit (1 (3/4 gallon fill) 8003A Base, 1 quart 8003B Activator)equals 1 full gallon mixed.
-
-
Barriershield Primer - Gallon
$101.45 $134.93
-
BARRIERSHIELD™ Barrier Coat Primer is an perfect over incompatible or unknown antifoulings. It is an excellent primer over sanded fiberglass, and also is a excellent barrier against galvanic corrosion. BARRIERSHIELD™ also prevents leaching of TBT antifouling coatings, which is a major concern in the super yacht industry. Also a perfect anticorrosive primer for underwater metals. A high performance coating For Yacht, Marine & Industrial.
SAFETY INFORMATION REQUEST FORM FAQ -
- Barrier / sealer coat over incompatible / unknown antifoulings
- Anticorrosive primer for underwater metals
- Seal coat over TBT when copper antifouling needs to be applied
- SUGGESTED USES: Sanded fiberglass, over incompatible or unknown antifoulings, sealing off TBT antifoulings, priming underwater metals.
- LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40°F or above 95°F. DO NOT APPLY ABOVE THE WATERLINE.
- COLORS: Gray
- FINISH: Matte
- VEHICLE TYPE: Hydrocarbon and Vinyl Resins
- SOLVENT TYPE: High Flash Naphtha / Xylene
- VOC: 3.76 lbs. / gal (450 grams / liter)
- SOLIDS BY WEIGHT: 40%
- WEIGHT PER GALLON: 8 lbs. per gallon (varies by color)
- RECOMMENDED DRY FILM: 4.0 mils
- COVERAGE: Theoretical coverage at two mils dry is 400 square feet per gallon, and recommended thickness of 4 mils dry would require 2 full coats. Material losses during mixing and application will vary and must be taken into consideration. Expect 50% less coverage on bare, rough or sandblasted surfaces.
- VISCOSITY AT 75°F (24°C): 70-80 KU
- AVERAGE DRY TIME 75°F: Dries to touch in 2 hours, overcoat in 5 hours. Lower temperatures & higher humidity will slow down dry times.
- RECOMMENDED REDUCER: 974 Reducer
- RECOMMENDED TOPCOAT: Antifouling Bottom Paint - Epoxy Hard or Ablative - 5 hours at 75 degrees F.
- ON SANDED ALUMINUM: Apply one thin coat of Etch Primer before applying Barriershield.
- APPLICATION: Brush, Spray or Roller
- Roll: 3/8" - 1/2" nap mohair metal, lambskin, phenolic core roller. Keep roller wet. Roll in one direction, rewet, then cross roll. Product can bereduced as needed with Hi Flash Naphtha to allow proper flow out and performance.
- Spray: Conventional Air Gravity Feed 59-70 psi, Tip Size .055 -.070, Airless 2200-2500 psi, Tip Size .013-.017. Product can be reduced with Xylene as needed for proper flow out and performance. For Air Spray reduce 25% with enamel reducer (Xylene).
- SURFACE PREPARATION: Water blast surface to remove all loose paint, dirt, oils and grease. Abrade with 240 grit dry sandpaper or equivalent. Solvent wipe down to remove all sanding residue.
- POT LIFE: Not Applicable
- SHELF LIFE: Minimum 36 months
- MIXING: Mix for 5 minutes, making sure that all solid material is mixed thoroughly.
- PACKAGE: 1 Gallon cans, 5 gallon cans, quarts.
- CLEANUP: 974 Reducer
-
Bottom Protect - Epoxy Primer Gallon Kit
$68.45 $91.04
-
Provides a seamless epoxy coating that creates a high build water barrier that eliminates any direct path for water migration. Bottom Protect™ 8000A / 8000B High Build Epoxy Primer is a heavy duty 3:1 epoxy coating that prevents water absorption and blistering of your fiberglass hull.
Bottom Protect™ 8000A / 8000B High Build Epoxy Primer Gelcoat Blister Repair System provides a seamless epoxy coating that creates a high build water barrier that eliminates any direct path for water migration. Bottom Protect™ 8000A / 8000B High Build Epoxy Primer is a heavy duty 3:1 epoxy coating that prevents water absorption and blistering of your fiberglass hull.
SAFETY INFORMATION REQUEST FORM FAQ -
- Covers 200 - 300 square feet / gallon depending on application thickness.
- 3-5 coats recommended for best application for gelcoat blistering protection.
- Prevents Water Absorption and Blistering.
- Eliminates Direct Path for Water Migration.
- Heavy Duty 3:1 Epoxy Coating.
- Excellent Anticorrosive Substrate Primer for Metals.
- Suggested Uses: Prevention and repair of gelcoat blistering
-
Sign up to get the latest on sales, new releases and more …
© 2017 TopSecretCoatings.
All rights reserved.
Powered by Shopify
