SAFETY INFORMATION REQUEST FORM FAQ
|BLUE WATER MARINE PAINT®||INTERLUX®||PETIT®||SEAHAWK®||WEST MARINE®|
|Copper Shield Uno™||ACT™||Ultima SSA™||AF-33™||---|
The Adhesion Bond is a non-toxic adhesion promoter that is added to any of the urethanes to provide excellent adhesion properties too hard to adhere to surfaces; including glazed or unglazed ceramic, porcelain, quarry and other tile and grout surfaces.
Mixing Instructions: Pour three (3) ounces of the Adhesion Bond per gallon into Top Secret’s urethane Part A (Resin) and stir together for two (2) minutes. Allow the mixture to sit for ten (10) minutes and then follow Top Secret’s recommended mixing instructions. See technical data sheet or application guide for further details.
Additional Information: The Adhesion Bond will increase the overall durability of the product. It is important to allow the ten (10) minute induction time for the Adhesion Bond and the Part A (Resin). This induction time will allow the product to meet its full adhesion characteristics much faster (within 24 hours). The Adhesion Bond does not have an impact on the pot life or working time. The Adhesion Bond can be used with any of the other Additives listed on this page. Follow the proper mixing instructions per the technical data sheets and / or application guide.
SAFETY INFORMATION REQUEST FORM DATA SHEET TSC TILE & GROUT COATINGS BROCHURE
Application / Surface Prep Kit includes: 5 Gallon Plastic Bucket, 9" Roller Handle, 9" Roller cover, 2 1/2" Bristle Brush, 1 Gallon Acid Magic™ Etching Cleaner, 1 Box of TSP Cleaning Neutralizer, Scrub Brush, Mixing Sticks, 9" x 12" Drop Cloth & 2 pairs of Plastic Gloves.
Patented ACID MAGIC™ cleans, etches with no fumes, & safe for skin. Covers 250 square feet per kit.
What is ACID Magic™?
ACID Magic™ is a full strength muriatic- based product formulated to ship, use, and store easier than standard muriatic acid. ACID Magic™ cleans, clarifies, and etches like full strength muriatic acid.
What makes ACID Magic™ so user friendly?
Our special blend of ingredients won’t burn intact skin and reduces corrosive fumes, without diluting the acid. This makes it very effective to use both indoors and outdoors for a wide variety of cleaning and maintenance jobs. Always provide active ventilation when working indoors.SAFETY INFORMATION REQUEST FORM
Safewipes are an effective way to remove graffiti, grease, grime or stains off Top Secret's urethane products. If neutral or heavy duty cleaners are not removing the affected area, Safewipes should be used in accordance with the directions below.
Before starting, put on the gloves.
1. Step 1: Tear open Graffiti 'Safewipes' Pouch, unfold and scrunch up towel. Using a circular wiping motion remove graffiti in small areas at a time, turning the towel over as you go. A soft bristle brush can be used for more aggressive stains or graffiti.
2. Step 2: For best results, tear open Graffiti 'Afterwipes' Pouch, or simply use a damp towel, and wipe over the area to remove any smears and grime, leaving the job perfect.
Note: Do not let liquid from Safewipes remain on the coating without wiping it off with clean water for longer than 2 minutes.
Top Secret Coatings has developed revolutionary technology that is used to create environmentally friendly urethane and epoxy coatings. What is so unique about the technology and products is that it is done with water as the solvent. Top Secret Coatings do not use a co-solvent or exempt solvents. These products offer many environmental advantages, including: