TS-100 Silicone Epoxy
$48.46 $60.59
-
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS CONCRETE FLOOR APPLICATION METAL ROOF APPLICATION TUB, SINK, TILE COUNTERTOP APPLICATION -
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Provides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
TS-100 Silicone Epoxy CLEAR
$48.46 $60.59
-
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequaled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS CONCRETE FLOOR APPLICATION METAL ROOF APPLICATION TUB, SINK, TILE COUNTERTOP APPLICATION -
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Provides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guarantee.
-
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
strong>PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-101 Leveling Thinner
$20.33 $25.41
-
Leveling Thinner is a proprietary blend of solvents that improves the viscosity leveling properties and dry and cure times of paint and coating products. Enhances the application of paint. Includes effective conditioning and drying agents. Cleans spills and tools after application. Use only where recommended for best results.
SAFETY INFORMATION REQUEST FORM -
- Improves the viscosity and leveling properties of paint and coating products.
- Use to clean up tools and spills.
- Improves dry and cure times.
-
INTENDED USE: Use Leveling Thinner to thin and condition paint and coating products where recommended.
CLEAN UP: Use to clean up tools and spills.
RECOMMENDATIONS: Use with TS-100, TS-188, TS-200 & TS-780.
TS-103 Ready-Mixed Aluminum
$46.52 $58.15
-
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequalled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Provides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guaranty.
-
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-160 Accelerator / Hardener
$15.48 $19.35
-
Accelerator/Hardener is an optional ‘pour-in additive’ for floor paint and coating products. Use it to increase the hardness, corrosion resistance, scuff resistance, and chemical resistance of paint. Accelerates the dry and cure time of paint. Improves resistance to hot tire pick-up when used with concrete floor coatings. Use it in applications where dry and cure times are limited. Highly concentrated for easy use. Three ounce container treats 1 quart, 1/2 pint treats 1 gallon, quart treats 5 gallons. Reduce dosage by 50% when used with TS-100 Silicone Epoxy Clear when applied to wood. Pot-life is approximately 2-4 hours. Color: Clear. Clean up with xylol.
SAFETY INFORMATION REQUEST FORM -
- Improves the dry and cure times of concrete coatings.
- Improves resistance to hot tire pick up.
- Improves chemical resistance.
- Concentrated pour in product.
- Extremely effective.
-
INTENDED USE: A pour in additive for use with concrete floor coatings that accelerates and hardens concrete coatings and paint products.
RECOMMENDATIONS: Use with TS-100 Silicone Epoxy or TS-200 Mono-Epoxy. Acceptable for use on concrete, tile, masonry and wooden floor surfaces.
TS-200 Mono-Epoxy
$120.79 $143.80
-
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS - Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-200 Mono-Epoxy CLEAR
$132.87 $166.09
-
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET APPLICATION INSTRUCTIONS - Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-4 Urethane Reinforced Alkyd
$27.98 $34.98
-
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guarantee.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-4 Urethane Reinforced Alkyd CLEAR
$34.88 $43.61
-
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.lifeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minimum of two coats is required.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guarantee.
-
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-605 Fast-Dry Synthetic Thinner
$15.83 $18.85
-
Fast-Dry Synthetic Thinner is a solvent that improves the viscosity leveling properties and dry and cure times of paint and coating products. Enhances the application of paint. Includes effective conditioning and drying agents. Excellent for cleaning tools and spills. Use only where recommended for best results.
SAFETY INFORMATION REQUEST FORM -
- Improves dry and cure times.
- Improves the viscosity and leveling properties of paint and coating products.
- Enhances the penetration of paint and primer.
- A strong and effective cleaning agent.
-
INTENDED USE: Use to thin and condition paint and coating products where recommended.
CLEAN UP: Use to clean up tools and spills.
RECOMMENDATIONS: Use with TS-66, TS-222, TS-664, TS-4985, TS-6390 & TS-6433.
TS-6390 Ever-Last Epoxy Primer Kit
$173.20 $216.50
-
Ever-Last Epoxy Primer is a two component polyamide epoxy floor coating primer intended for heavy-duty applications. It is your best choice for use on concrete floors because it will not react negatively with alkalis within the concrete matrix. Use it wherever there is high volume motorized traffic or where corrosive chemicals, spilled fuel, oil or standing water is regularly present. Offers excellent adhesion and hardness with superior chemical resistance. Will not pick up to hot tires. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Improves dry and cure times.
- Improves the viscosity and leveling properties of paint and coating products.
- Enhances the penetration of paint and primer.
- A strong and effective cleaning agent.
-
INTENDED USE: A super-duty epoxy floor primer coating intended for industrial floor coatings applications. Suitable for commercial and residential use.
SURFACES: Concrete, tile, masonry, fiberglass, metal and wood.
USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, food service areas, bathrooms and laundry rooms. Acceptable for use with all epoxy garage floor coating products.
THINNER: TS-605 Thinner.
APPLICATION: Apply by roller-coat or spray.
TS-664 Etching Primer
$106.57 $133.21
-
Etching Primer is a phenolic modified alkyd primer coating that produces a sound base coat for all floor paint and coating products. An exceptionally high quality product that conforms to government specification number TT-P-664 C, D. Fast drying; it is dry enough to be over-coated in just two hours! Choose it for its speed, ease of application, tenacious (acid etching) bond and long term durability if provides. Adheres to virtually any surface. Guaranteed to be lacquer proof (won’t lift due to compatibility issues). One gallon covers up to 300 square feet. See Product Data Sheet for further details.
NOTE: This primer is porous, intended to draw the top coat into it creating an unbreakable bond. Care should be taken to be sure it does not draw in unwanted moisture at time of application.
SAFETY INFORMATION REQUEST FORM PRODUCT DATA SHEET -
- Use it on most any surface.
- Produces an exceptionally tenacious etching bond.
- Fast drying.
- Recoatable in only two hours.
- Sandable in two hours.
- High build.
- Will fill and seal small cracks and voids.
- Withstands heat to 350F.
- Resists cracking, peeling and chipping.
-
INTENDED USE: A high adhesion primer coating for floor coating products. Intended for use on hard to adhere to surfaces. Industrial commercial and residential use.
SURFACES: Concrete, glazed tile, VCT tile, linoleum, masonry, metal, synthetic materials and wood.
USES: Hard to adhere to surfaces. Commercial and industrial areas, kitchens, food service areas, bathrooms and laundry rooms.
THINNER: TS-605 Thinner.
APPLICATION: Most applications are by roller coat but it is sprayable.
TS-695 Etching Cleaner Concentrate
$35.85 $44.82
-
Etching Cleaner Concentrate is a cleaner-etcher solution used as a preparation treatment on concrete, tile and masonry. Widely used on floors prior to the application of concrete floor coatings and sealers. Removes unwanted contaminants and neutralizes lime and lime by-products on the surface which may seriously impair the coatings’ ability to form a good bond. It is easier, safer and more effective to use than muriatic acid. Removes lime, rust stains, grease, oil and contaminates. Corrects the pH on concrete and other surfaces promoting adhesion. Concentrate saves money on shipping costs. Mixed pint cleans 50-75 sq. ft., mixed quart cleans 200 square feet, mixed gallon cleans 800 square feet.
SAFETY INFORMATION REQUEST FORM -
- Eliminates the need for grinding or blasting in many applications.
- Neutralize with TSP.
- Fast acting and highly effective.
- Concentrate is cheaper to transport.
- Corrects the pH.
- Improves the bonding power of paint and coating products.
-
INTENDED USE: Use to remove contaminates, stains and grime from floors. An effective pre-paint cleaner-etcher solution.
SURFACES: Ferrous and nonferrous metals, fiberglass, concrete, tile, masonry and synthetic materials.
APPLICATION: Mix 1 part concentrate with 3 part water. Apply to pre-wet surface, agitate with a push broom as needed, allow to stand 20-30 minutes, flush thoroughly with water. Use undiluted to remove heavy contamination or for heavy-duty requirements.
TS-780 Mono-Epoxy Primer
$64.96 $81.20
-
Mono-Epoxy Primer makes priming with epoxy easier than ever with its unique no-mix formula. A new generation epoxy-ester primer that utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Provides a sound base for the application of most any floor paint or coating product. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. See Product Data Sheet for further details.
SAFETY INFORMATION REQUEST FORM -
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Will fill and seal small cracks and voids.
- Good chemical resistance.
- Withstands harsh weather climates.
- A barrier coat that prevents water intrusion.
- Resists cracking, peeling and chipping.
- Low odor.
-
INTENDED USE: An easy to use no-mix epoxy floor coating primer acceptable for a wide variety of applications.
SURFACES: Concrete, tile, masonry and wood.
USES: Commercial kitchens, manufacturing and industrial areas, retail spaces, food service areas, bathrooms and laundry rooms. Excellent for use with epoxy garage floor coatings.
THINNER: TS-101 Thinner.
APPLICATION: Most applications are by roller coat but it is sprayable.
Sign up to get the latest on sales, new releases and more …
© 2018 TopSecretCoatings.
All rights reserved.
Powered by Shopify
