|
If its time to
paint a deck,
patio, porch or
handrails you
need TS 90
Deck-Pro. These
structures are
difficult keep
looking their
best so we put
our heads
together and
came up with an
innovative
approach. We
know you hate to
paint so we took
our best
Hard-Shell
Exterior 100%
acrylic and
added durable
epoxy resins to
it creating a
new generation
deck paint that
performs just
like a pro.
Deck-Pro is your
best choice when
you want a long
lasting
preservative
deck coating
that resists
cracking,
peeling,
chalking and
will hold up to
inclement
weather, salt
air, heavy foot
traffic, pool
chemicals,
constant wet and
dry conditions
and the
destructive
effect of ultra
violet rays.
Finally, an easy
to use,
water-based,
environmentally
friendly,
waterborne
acrylic epoxy
deck paint that
really
performs.
Deck-Pro is a
high
performance,
waterborne
interior/exterior
acrylic epoxy
reinforced
acrylic enamel
deck paint that
adheres to most
anything and
outperforms all
other waterborne
deck coatings in
this category.
This enamel like
deck coating is
intended for use
in high traffic,
hard use areas
where
exceptional
weathering
properties and
excellent color
retention are
desired.
Excellent for
use on floor
areas, steps,
railings or on
large wooden
structures. Fast
drying and
acceptable for
use in cold
weather
conditions. Deck
Pro is excellent
for anywhere
high durability
and easy
application is
desirable. This
formulation
includes 58%-61%
solid content
which is far
higher than
competing
brands.
Acceptable for
use as a deck
coating, porch
floor paint,
pool deck
coating, stair
paint or as an
alternative to
typical concrete
coatings or
epoxy floor
coatings applied
to wooden or
concrete
surfaces.
Acceptable for
use on pressure
treated wood.
Use it in
combination with
TS 100-10 Peel
Stopping Primer
to create an
unbeatable, long
lasting deck
paint system.
For added slip
resistance in
high traffic
areas add 1 lb
Gaco-Grip or
Tred-Tex slip
resistant paint
additives on a
per gallon
basis. These non
slip paint
additives are
available on our
supplies page.
(See TS-222
Floor Grip non
skid coating or
TS-110 non skid
paint for slip
resistant paint
and concrete
coating
applications)
Stats: Practical
coverage is up
to 400 square
feet on sealed
surfaces!
Approximately
250-300 square
feet per gallon
on wood,
masonry,
concrete or
unsealed
surfaces
depending on
texture and
porosity. Dry to
the touch in 1
hour. Pot life:
Not applicable.
Available in
quart, gallon or
five gallon
cans. Not
recommend for
constant
immersion
service, strong
acid or chemical
exposure, Apply
by brush, roller
or spray.
Available in
satin and 200
deck paint
colors.
Recommended
preparation: For
best results
remove old
paint, loose
scale, grease,
oil and
contaminates.
Sand, grind,
bead blast or
power-wash prior
to application.
When painting
cement, wood or
coating
concrete,
surfaces must be
thoroughly dry
before the
application of
and cement paint
application.
Recommended
primers: Works
best when used
in combination
with TS 100-10
Peel Stopping
Primer.
Thin & clean up:
Thins and washes
up easily with
water |