|
| TS-6708 1-Part Moisture Cure Epoxy |
$541.56 |
|
 |
| This exclusive formula pushes modern industrial coatings technologies to the limit and beyond. Imagine a VOC compliant hi-tech coating that produces a chemical reaction from water in the air? Water from the air or other sources actually acts as the catalyst to make the cure.
Now you can paint your boat bottom and put it back in the water before the paint is dry! Don't let rain or foul weather stop you from painting metal, wood or concrete because water is what creates a chemical reaction and makes this product cure! Originally designed to be tough enough to paint on giant aircraft carrier anchor chains while in service without chipping, cracking, peeling or wearing.
An amazing product that provides excellent resistance to chemicals in more diverse environments than ever before. Use in humid environments, in concrete and steel splash zones, retention ponds, waste-water treatment facilities, pipelines or anywhere coal tar epoxies are typically used. This quality product is scientifically engineered to provide extraordinary durability and still be easy to apply. Our 1 Part Moisture Cure Epoxy provides an enamel-like low sheen finish that is epoxy tough.
Available in one gallon cans. Coverage is 160-200 square feet per gallon. Dry to the touch in two hours. Not an anti-fouling coating. (see TS 700 Old Sailor Bottom Paint for anti-fouling service) Currently available only in Black & Red low sheen finishes. Thin with TS 605 Thinner. Apply by brush, roller or spray. |
|