|
Our best selling, most popular and widely used
primer because of its versatility, sandability and protective
qualities over a wide variety of substrates. A hi-performance
Phenolic Modified Alkyd Primer specially formulated for use with
hard to prime surfaces such as aluminum and fiberglass. Also
acceptable for use with metal or wood surfaces. Basically, you can
use it almost anywhere and most any application! TS 664 Aluminum &
Fiberglass Primer is a lacquer proof, fast drying, high solid, low
VOC primer coating that inhibits rust, is resistant to salt spray
and penetrates cracks around light rust and mill scale. It protects
corners and edges and resists exposure to the damaging effects of
weather. Intended for use as a primer coat for properly prepared
surfaces. Use on any interior or exterior surfaces. Excellent for
use on all fiberglass and aluminum boats, aircraft and equipment.
Lacquer proof primer and finish coats such as nitrocellulose
lacquers may be applied directly over it without the worry of
lifting or wrinkling. Available in quart, gallon or five gallon
cans. Color: White or Red Oxide. Finish is low sheen. Solvent: TS
605 Thinner. Clean spills and tools immediately with TS 2 Thinner.
Coverage is approximately 300 square feet per gallon, depending on
the texture and porosity of the surface. Dries to the touch in 30
minutes. Recoat in 8 hours. Apply by brush, roller or spray. |
