View/Change your order:

$209.56

Ever-Last Epoxy is a two component, high performance, epoxy protective coating. It is catalyst-cured providing excellent chemical resistance and hardness to most any hull, deck, marine equipment or infrastructure in marine environments. Use it wherever harsh environments, salt air, and abusive weather conditions require a hard, highly durable rust preventative protective coating. A waterproof coating rated for constant submersion service. Provides outstanding service in virtually all marine paint applications. Intended for use on metal, wood, fiberglass, aluminum and composite materials. Use it in all marine paint and coatings applications such as hulls, decks, engine rooms, galleys, heads, machinery, high traffic floors, deck houses, holds, passageways, cabinets, food handling equipment and lockers. Excellent for refinishing water tanks and piping. When used as an aluminum boat paint or fiberglass boat paint topside coating it provides exceptional performance and durability. Ever-Last Epoxy can be self priming depending on type of substrate and application, however, a marine primer coat is typically necessary. Apply using brush, roller or spray (conventional, airless or electrostatic).

Stats: Covers 400-450 square feet per gallon on porous surfaces such as concrete, up to 500 square feet on non porous surfaces. Available in gloss, semi-gloss and eggshell finishes. Available in clear, stock and custom mixed colors and tint bases. Dry to the touch in one hour, tack free in 8 hours, recoat in 24 hours. Pot life is 8 hours @ 70 degrees F. For added slip resistance in traffic areas add 1 lb fine pumice stone or ground rubber. Available in 200 colors and 13 drab colors. Custom colors are available on request. Low temperature curing (as low as 20 F.) Available in 1 gallon, two gallon and 5 gallon kits.

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner or primer. Steel: TS 5679 Phos-Pro Rust Converting Cleaner, TS 695 Etching Cleaner.

Recommended primers: Concrete & masonry-TS 6390 Ever-Last Epoxy Primer or TS 664 Etching Primer. Wood-TS 664 Etching Primer. Fiberglass, aluminum and composite materials-TS 117 Pre-Wash Primer in combination with TS 664 Etching Primer. Steel & iron: TS 117 Pre-Wash Primer in combination with TS 664 Etching Primer or TS 900 Fabrication Primer.

Thin & clean up: Thinning not typically required. Use only with factory recommended thinner, TS 605 Thinner. Clean all equipment thoroughly with TS 605 Thinner. Clean up with TS 605 Thinner or TS 610 Lacquer Thinner.

NOTE: Not an antifouling bottom paint. Recommend TS 700 Old Sailor Bottom Paint for antifouling paint duty.