$311.96

A favorite with hunters, fishermen, and outdoor enthusiasts. Camo-Coat provides you with the exact government spec non-reflective camouflage "drab" colors you want in a tough MIL SPEC alkyd enamel. This is the same stuff you expect to see on a W W II Jeep, tank, Striker Fighting Vehicle and other modern military equipment. Meets or exceeds government specification number TT E 527. This marine enamel is suitable for use on the interior and exterior of all types of marine vessels, vehicles and equipment. Acceptable for use on all boats, vehicles, guns, hunting stands, tools, machinery, etc. Adheres to ferrous and non-ferrous metals, fiberglass and wood. It is widely preferred as a camouflage marine coating and equipment enamel that withstands all types of weather conditions. The fully cured finish can withstand repeated washing and normal everyday abuse. It has proven its performance in various military, marine, industrial and commercial maintenance fields. Withstands salt spray, impacts and resists rust. Excellent when used as a non-reflective interior or exterior drab enamel. When used as an aluminum boat paint or fiberglass boat paint topside coating it provides exceptional performance and durability.

Stats: Covers 300-400 square feet per gallon on porous surfaces such as concrete, up to 400 square feet on non porous surfaces. Dry to the touch in one hour. Tack free in 4-6 hours. Time to re-coat 12 hours. Dries hard in eight hours. Available in 200 colors and 13 drab colors. Custom colors are available on request. Compatible for electrostatic spray. Low temperature curing (as low as 20 F.) Available in quart, gallon and five gallon containers

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner or primer. Steel: TS 5679 Phos-Pro Rust Converting Cleaner, TS 695 Etching Cleaner.

Recommended primers: Concrete & masonry-TS 6390 Ever-Last Epoxy Primer or TS 664 Etching Primer. Wood-TS 664 Etching Primer. Fiberglass, aluminum and composite materials-TS 117 Pre-Wash Primer in combination with TS 664 Etching Primer. Steel & iron: TS 117 Pre-Wash Primer in combination with TS 664 Etching Primer or TS 900 Fabrication Primer.

Thin & clean up: Use only with factory recommended thinner, TS 101 Thinner. Clean all equipment thoroughly with TS 101 Thinner or for fast dry TS 605 Synthetic Thinner.

NOTE: Not an antifouling bottom paint. Recommend TS 700 Old Sailor Bottom Paint for antifouling paint duty.