View/Change your order:

$347.96

A premium fast drying, light weight marine grade nitrocellulose lacquer finish. An excellent choice for use on all speed boats, drag and sport boats. Boat owners choose this product for its beauty, light weight and ease in application. The very same government spec product specified by government agencies marine subcontractors. Conforms to government specification numbers TT L 20 and TT L 32. Aero-Lac has been formulated as a premium two coat marine finish system that will keep your boat looking like new for years. It provides beautiful, colorfast, durable and long lasting protection to a wide variety of metal, wood, plastic, carbon fiber and composite marine coating surfaces. Nitrocellulose has been added for quick drying and ease of use. Our formula is resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils. When used as an aluminum boat paint or fiberglass boat paint topside coating it provides exceptional performance and durability. This product should not be used over bear metal. Best performance will be obtained when it is applied over metal surfaces properly pretreated and primed with lacquer resisting primers. Available in clear, our 36 stock and custom colors, 13 federal standard camouflage colors or pick from our list of standard and safety marine coating colors. Custom colors are available upon request.

Stats: Covers 400-500 square feet per gallon. Dry to the touch in 5 minutes, tack free in 12 minutes, recoatable in 1 hour, dries hard in two hours. Pot life: Not applicable * Available in 200 stock marine paint colors. Custom colors available on request for an additional $5.00 per gallon. Available in quart, gallon and five gallon containers.

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner or primer. Steel: TS 5679 Phos-Pro Rust Converting Cleaner, TS 695 Etching Cleaner.

Recommended primers: TS-117 Pre-treatment Wash Primer in combination with TS 664 Fiberglass & Aluminum Primer or TS 1184 Zinc Chromate primer.

Thin & clean up: Use only with factory recommended thinner, TS 610 Lacquer Thinner. Clean all equipment thoroughly with TS 610 Lacquer Thinner.

NOTE: Not an antifouling bottom paint. Recommend TS 700 Old Sailor Bottom Paint for antifouling paint duty.