Paints & Coatings

TS-166 Floor finish

TS-188 Clear Wood & Floor Hardener

$15.96

Harden your exterior or interior wood cabinets and floors with this premium quality clear gloss urethane that provides a durable finish with excellent adhesion and superior resistance to abrasion, marring, chipping and cracking. Excellent for use on interior surfaces and wherever a rock hard clear high gloss finish is desired. Use on kitchen and bath cabinets, floors, doors, trim, paneling and furniture. This mirror-like finish adds elegance, depth and beauty to any wood surface you want to harden or protect. Not recommended for exterior decks. Brush, roll or spray it on because it is easy to apply. Covers 400 - 500 square feet per gallon over smooth sealed surfaces. Will dry hard in 4 - 6 hours. Thin with TS 1 thinner. Available in quart, gallon or five gallon cans.

Stats: May be applied with a high quality synthetic bristle brush or lambs wool applicator. For best results apply between 50 and 85 degrees F. Covers 400-500 square feet per gallon over most surfaces depending upon porosity. Dries hard in 2-4 hours. Re-coatable in 2 hours. Crystal-Clear Floor Finish is available in Gloss or Satin. Two container kit includes Cross linker. Available in gallon containers only.

Recommended preparation: For best results remove old paint, clear coatings, loose scale, grease, oil and contaminates. Sand, grind or use paint remover prior to application.

Recommended primers: None.

Thin & clean up: Clean up tools and thin when needed with clean water.