|
There is nothing subtle about Zinc-Plate Rust
Stopping Primer! It’s absolutely loaded with protective zinc. A very
fast-drying zinc rich primer designed primarily as a
corrosion-inhibiting product for use on manufactured goods,
machines, equipment, ferrous and nonferrous metal surfaces in harsh
industrial environments. Use it alone or before top coating with
urethane, lacquer or enamel topcoat. A premium-grade, high solid
industrial primer that not only acts as an effective rust
preventative on steel and iron substrates but should be viewed as an
integral component of any rust preventative coating system. It is
yellow zinc rich and contains a balanced composition of special
pigments and phenolic modified resin providing good rust-inhibitive
properties and blister resistance for better adhesion and metal
protection. It is satisfactory for application in a wide range of
temperatures and humidity conditions. Conforms to government
specification number TT-P-1757. Color: Yellow. Product type: Zinc
Chromate Phenolic Modified Alkyd Rust-Inhibitive Primer.
Stats: Physical characteristics: Viscosity: 20-25 sec. #2 Zahn. Dry
to the touch: 5-10 minutes, tack free: 20 minutes, time to recoat:
30 minutes, dry hard: 30 minutes. Weight Solids: 58-60%. Practical
coverage is 300-350 square feet per gallon @ approximately 2.0 mils
dry.
Recommended preparation: For best results remove old aircraft
primer, aircraft paint, loose scale, grease, oil and contaminates.
Sand, grind, blast or power-wash prior to the application of any
cleaner. All surfaces must be thoroughly dry before the application
of any aircraft primer or aircraft coating systems. Recommend the
use of TS-117 Wash Primer in all
aluminum aircraft paint applications.
Steel: TS-5679 Phos-Pro Rust Converting
Cleaner, etch fiberglass and aluminum with
TS-695 Etching Cleaner.
Application: This product is at a spray viscosity designed for
airless use: The primer should be allowed to dry a minimum of 2
hours before recoating with subsequent primers or topcoats. It
should be applied to a dry film thickness between 0.3-0.4 mil. It is
satisfactory for application in a wide range of temperatures or
humidity conditions. NOTE: This aircraft primer is designed for
spray application over surface-treated metal or pretreatment
coatings (See TS-117 Pre-Treatment Wash Primer). If used for dip or
flow-coat application, the product suitability should be determined
by the user. Stir thoroughly before use. Brush, roller, or spray.
Thin & clean up: Use only with factory recommended thinner. It
should not be thinned unless absolutely necessary. Thin if necessary
with TS-605 Thinner. Tools and
equipment may be cleaned with TS-605 Synthetic Thinner or
TS-610 Lacquer Thinner.
For use with most aerospace coatings, airplane paints and primers,
aircraft finish, aluminum aircraft paint, aircraft paint colors,
high
performance aircraft coatings, performance aircraft coating, high
performance aircraft, aircraft paint schemes.
|
