$71.96

Brighten and protect your wooden floors with this new generation, premium quality clear waterborne urethane / acrylic polymer hardwood floor finish. This easy to apply clear finish for hardwood floors is guaranteed to be non-yellowing, highly durable, non-flammable and virtually odor-free. Crystal-Clear Floor finish provides outstanding brilliance, protection and durable service. It resists chipping, dulling and most household chemicals. Crystal-Clear Floor Finish has been formulated to provide beautiful high gloss protection to high traffic areas such as floors, hallways, stairways and landings. This mirror-like clear finish for hardwood floors adds elegance, depth and beauty to any wood surface. Acceptable for use on any wood surface that must withstand high traffic and heavy use. Three coats are recommended for best results. Not intended for use as a deck stain, exterior clear finish or submersion service.

Stats: May be applied with a high quality synthetic bristle brush or lambs wool applicator. For best results apply between 50 and 85 degrees F. Covers 400-500 square feet per gallon over most surfaces depending upon porosity. Dries hard in 2-4 hours. Re-coatable in 2 hours. Crystal-Clear Floor Finish is available in Gloss or Satin. Two container kit includes Cross linker. Available in gallon containers only.

Recommended preparation: For best results remove old paint, clear coatings, loose scale, grease, oil and contaminates. Sand, grind or use paint remover prior to application.

Recommended primers: None.

Thin & clean up: Clean up tools and thin when needed with clean water.