$271.96

A Chromate Polyvinyl Butyral Two-Component Etching Wash Primer. A very good idea to include when preparing aluminum metals and components for paint. Intended for use on all hard-to-adhere to metal surfaces prior to the application of primer and top-coating systems. It is especially effective on hard-to-adhere to surfaces such as aluminum and galvanized steel. It is not intended as a permanent protective primer in itself although some protection is afforded for short periods of time. To ensure best results, the pre-treatment should be coated with primer and finish as soon as possible. Meets Federal Specification number MIL P 15328. Recommended application is by means of a light brush coat at a dry film thickness of .00076 cm. to .00127 cm. Although, for best adhesion results, the wash primer should be applied by spray to no more than a fog coat. It is not necessary to hide the substrate with the primer. The major purpose of this primer is to provide an adhesion surface for subsequent primers and topcoat. Color: Green. Dry to the touch in 5 10 minutes, tack free in 10 minutes, time to recoat 15 30 minutes. Thin with Isopropyl Alcohol. Catalyst Mixing Rate: 4: 1 Part A : B. Clean tools and equipment with alcohol, TS 605 Synthetic Thinner or TS 610 Lacquer Thinner. Available in gallon or five gallon cans.

Stats: Covers 400-500 square feet per gallon. Dry to the touch in 5 10 minutes, tack free in 10 minutes, time to recoat 15 30 minutes. Pot life: 2-3 hours. Low temperature curing (as low as 20 F.) Catalyst Mixing Rate: 4: 1 Part A : B. Available in one gallon and five gallon kits.

Recommended preparation: For best results remove old marine coating, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner. All surfaces must be thoroughly dry before the application of any boat primers, topside coatings, bottom paints, spar varnish or brightwork varnish.

Thin & clean up: Use only with factory recommended thinner, Thin with Isopropyl Alcohol. Clean tools and equipment with alcohol, TS 605 Synthetic Thinner or TS 610 Lacquer Thinner