|
Sport-Coat Pro is
your A Game way
to create a
professional
quality indoor
or outdoor
activity area
that will
perform on a
professional
level. A
commercial
quality sport
court coating
system for use
on all indoor
and outdoor,
recreational
tennis,
basketball,
handball,
squash, and
soccer courts.
Withstands the
most adverse
weather
conditions while
meeting the
surface demands
of competitive
sports
activities.
Formulated with
high performance
resins that
produce a highly
durable,
non-glare, sport
court paint.
Sport-Coat Pro
has superior
impact
resistant,
abrasion
resistant, color
retentive,
hardness and
resists wearing,
fading and
chalking. It was
conceived
technically as a
finishing system
over a variety
of asphalt,
masonry and
concrete
surfaces,
however, it is
also suitable
for use as a
resurfacing
system for
asphalt and
concrete
driveways,
sidewalks,
swimming pool
decks and diving
areas, hot tub
areas, patios,
interior and
exterior sports
shower and
locker room
areas, running
and jogging
pathways and
bicycle lanes.
Excellent for
use in
environments
wherever there
is the need to
resurface
architectural
asphalt and
masonry
substrates.
Sport-Coat Pro
has been
designed as
either a three
or four coat
system. The
third speed coat
application
determines the
desired speed of
the court
finish. Choose
from SLOW # 90,
MEDIUM #100 or
FAST # 110
aggregate
additives to
control court
speed. A forth
coat is applied
to seal the
finish. For
added slip
resistance in
high traffic
areas add 1 lb
Gaco-Grip or
Tred-Tex slip
resistant paint
additives on a
per gallon
basis. These non
slip paint
additives are
available on our
supplies page.
(See TS-222
Floor Grip non
skid coating or
TS-110 non skid
paint for slip
resistant paint,
deck paint and
concrete coating
applications)
Stats: Practical
coverage is
325-350 square
feet per gallon
depending on
porosity Dry to
the touch in 1
hour. Pot life:
Not applicable.
For best results
apply between 60
and 90 degrees F
and when the
relative
humidity is 75%
or less.
Available in 5
ready mixed
colors including
White, yellow,
red, green,
brown. Available
in one gallon or
five gallon
containers.
Recommended
preparation: For
best results
remove old
paint, loose
scale, grease,
oil and
contaminates.
Sand, grind,
bead blast or
power-wash prior
to application.
When painting
cement, wood or
coating
concrete,
surfaces must be
thoroughly dry
before the
application of
and cement paint
application.
Recommended
primers: For
best results we
recommend using
TS 1045 Epoxy
Surface Pre
Treatment Primer
then TS 6390
Ever-Last
Primer.
Thin & clean up:
Water. |