$248.76

TS-107 Sport Coat Paint is an easy and economical way to paint or renew your indoor or outdoor activity area. Specifically formulated for use on indoor and outdoor, recreational tennis, basketball, handball, squash, and soccer courts. Withstands adverse environmental weather conditions while meeting the surface demands of a variety of sports activities. Reinforced with epoxy for added durability and to produce the kind of scuff resistant non-glare, sport court finish you’re looking for. TS 107 Sport-Coat Paint has good impact resistance, abrasion resistance, color retention, hardness and resists wearing, fading and chalking. This Sport-Coat Coating has been formulated as a heavy duty product that adheres to a wide variety of asphalt, masonry and concrete surfaces. It has been designed as either a two or three coat system. To control ball speed and traction you may want to add aggregate (see TS 18664 Gaco Grip or TS 902 Tred-Tex) to the second coat then apply a third coat to seal the finish. A fourth top coat may be added for extra life if desired. Not recommended for use as an garage floor coating or where there is motorized traffic. Acceptable for use as an epoxy paint, sport court coatings, sport court paint, tennis court paint, commercial floor paint, deck paint, concrete epoxy coating, cement coatings or water based epoxy in activity and areas subject to high foot traffic. For added slip resistance in high traffic areas add 1 lb Gaco-Grip or Tred-Tex slip resistant paint additives on a per gallon basis. These non slip paint additives are available on our supplies page. (See TS-222 Floor Grip non skid coating or TS-110 non skid paint for slip resistant paint, deck paint and concrete coating applications)

Stats: Covers 250 square feet per gallon. Dry to the touch in 1 hour. Pot life: Not applicable. For best results apply between 60 and 90 degrees F and when the relative humidity is 75% or less. Available in 5 ready mixed colors including White, yellow, red, green, brown. Available in one gallon or five gallon containers.

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to application. When painting cement, wood or coating concrete, surfaces must be thoroughly dry before the application of and cement paint application.

Recommended primers: For best results we recommend using TS 1045 Epoxy Surface Pre Treatment Primer then TS 6390 Ever-Last Primer. Thin & clean up: Water.