$455.96

Now you can really heat things up with TS-105 Boiler Coat! A direct to metal (DTM) silicone based rust preventative coating that is heat resistant to 1200 degrees Fahrenheit! Excellent for use on any exterior or interior surface that is subject to intense temperatures. Heat resistant, ready mixed, silicone based high heat paint, direct to metal coatings excellent for use on anything that is subject to intense heat sources. Rust prevention, durability, performance and protection are outstanding with Boiler-Coat. A heat resistant silicone resin vehicle based coating specifically developed to meet today’s demand for superior heat resistant coatings. Ideal for use as a rust preventative paint or heat treatment to a wide variety of marine substrates including engine compartments, engine blocks, exhaust manifolds, boilers, exhaust stacks, bar-b-cues, furnaces, grills, hoods, stoves, and other areas where a heat resistant highly durable protective finish is desired. A fast-drying, easy-to-apply paint specially formulated to withstand high temperatures without loosing its luster, discoloring or breaking down. A government spec performance equivalent that complies with specification number TT-P 28G so you know you are getting the best! Dries to a matte finish.

Stats: Covers 300-400 square feet per gallon. Dry to the touch in 1-2 hours. Pot life: Not applicable * Very high in solid content so it will require reduction in most applications. Low temperature curing (as low as 20 F.) Available in black or aluminum colors. Available in gallon and five gallon containers

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to application. Steel: TS 5679 Phos-Pro Rust Converting Cleaner, TS 695 Etching Cleaner.

Recommended primers: None.

Thin & clean up: Use only with factory recommended thinner, TS 101 Thinner. Clean all equipment thoroughly with TS 101 Thinner or TS 602 Mineral Spirits.