$415.96

The revolution continues with TS-100 1 Part Epoxy-Clear! A clear version of our break through 1 Part Epoxy! It is a waterproof, all purpose clear finish that can be used in the kitchen and bath to beautify and preserve wood, metal, ceramic tile, concrete, composites or most any interior or just about any surface you can think of. It has all the exceptional qualities of our TS-100 1 Part Epoxy without the pigment, however, it has been fortified with UV inhibitors for long life and superior protective qualities. It creates a highly durable mar-resistant finish that produces exceptional depth and brilliant clarity to the finish. Its the ultimate in clear coatings and unmatchable in hardness, flexibility and gloss. So mirror-like in its gloss and luster that it makes varnishes pale in comparison. Guaranteed not to chip, crack or peel when properly applied. Here's an unusual guarantee. We guarantee this to be the finest clear finish if its kind you have ever used or we will double your money back. It's that good. Can you tell that we are proud of this product? Furniture makers, professional hardwood flooring installers, yacht refinishers and homeowners absolutely rave about this product. TS 100 1 Part Epoxy Clear is a blend of four proprietary, hi-tech, hybrid resins. No other protective clear top coat we know of can boast this! TS-100 1 Part Epoxy-Clear is a combination of the highest quality synthetic resins that provide maximum film properties over old and new surfaces. TS-100 1 Part Epoxy-Clear adheres to almost anything, is a decorative, protective coating that provides outstanding service on floors, cabinets, furniture, doors, trim, millwork, or most any surface. It is self leveling, lead-free and non-toxic when dry so it is safe around animals and children. Coverage is approx 700 sq. ft. per gallon at 2 mils dry on sealed surfaces. Actual coverage depends on the texture and porosity of the surface being coated. Reduce and clean equipment with TS 101 Thinner. Not recommended for immersion service or use on treated wood. Apply by brush, roller or spray. Speed up dry times or harden with TS 160 Accelerator / Hardener. Reduce the gloss with the addition of TS-150 Gloss Reducer. Available in quart, gallon or five gallon cans.

Stats: Covers 400-500 square feet per gallon on porous surfaces such as concrete, up to 800 square feet on non porous surfaces. Dry to the touch in 2-4 hours. Pot life: Not applicable * Very high in solid content so it will require reduction in most applications. Compatible for electrostatic spray. Low temperature curing (as low as 40F.) Available in high gloss sheen.

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to application. Steel, iron, aluminum: TS 695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any topside coatings, bottom paints, marine varnishes or brightwork varnish.

Thin & clean up: Use only with factory recommended thinner, TS 101 Thinner. Clean all equipment thoroughly with TS 101 Thinner or TS 602 Mineral Spirits.

Accelerate/Harden: See TS-160 Accelerator/Hardener on SUPPLIES Page.

Reduce gloss: See TS-150 Gloss Reducer on SUPPLIES Page.

NOTE: Not an antifouling bottom paint. Recommend TS 700 Old Sailor Bottom Paint for antifouling paint duty.