$83.96

A clear version of our innovative 1 Part Epoxy utilizing the exclusive hybrid resin blend technology that Top Secret Coatings is best known for. TS-100 1 Part Epoxy won’t crack, peel, chalk or yellow like the big brand name and home center hardwood floor finishes. What makes it unlike typical floor finishes is that it produces a film that remains both hard and flexible at the same time. Its silicone epoxy base allows high flexibility, heat resistance and UV stability while providing the excellent hardness, scuff resistance and resistance to cleaning agents and chemicals you expect from Top Secret Coatings. The single component oxygen cure allows it to hold its gloss longer, makes it easier to work with and less hazardous to the environment. No other product we are aware of has a wider range of floor finish application possibilities. 1 Part Epoxy Clear adheres to almost anything and self levels like a dream. Brush it on and watch the brush marks disappear before your very eyes! Professional floor coating installers recognize this product as being something very special. This clear floor finish offers excellent resistance to chemicals, spilled fuel, brake fluid and acids. It is impact resistant to 500 PSI and is heat resistant to 350+ degrees. It is gloss retentive, non-chalking and resists cracking, chipping and peeling. Additionally, it covers up to three times the area of typical clear floor coatings because its maximum dry film thickness is only two mils. That’s half the thickness of a sheet of paper! What more could you ask of any hardwood floor finish? 1 Part Epoxy Clear provides outstanding adhesion to hardwood floor surfaces, when painting concrete, steel, iron, masonry and ceramic tile! It is easy to use because it can be brushed, rolled or sprayed and it cleans up easily. This lead-free formula is low VOC, is engineered to provide extraordinary beauty, brilliance, durability, and is non-toxic when dry so it is safe around children and animals. Acceptable for use as a clear epoxy paint, garage floor coating, industrial floor coating, hardwood floor finish or as an alternative to typical concrete coatings or epoxy floor coatings. When used as a concrete coating, garage floor coating or basement floor coating for the home it provides exceptional performance and durability for up to 20 years!

Recommended preparation: Refer to TS 100 Applications page included with every shipment. For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner. Concrete: Strongly recommend the use of TS 695 Etching Cleaner as seen on our SUPPLIES page.

Recommended primers: Self priming on well prepared wood or concrete in two coats, thin first coat 25% with TS 101 Thinner. Dilute second coat only as needed.

Thin & clean up: Use only with factory recommended thinner, TS 101 Thinner. Clean all equipment thoroughly with TS 101 Thinner or TS 602 Mineral Spirits.

Accelerate/Harden: TS 160 Accelerator/Hardener is optional in most flooring applications.

Reduce gloss: See TS-150 Gloss Reducer on SUPPLIES Page. This product should not be used in combination with TS 160 A/H. Recommend using 50% or less of recommended mixture.