$415.96

Looking for something more durable than Gel-Coat, easier to use than a two-component epoxy and less hazardous than an aliphatic urethane? Is a single component Direct To Metal coating (DTM) on your wish list? Have you been praying for a durable environmentally friendly marine coating? Does a bargain sound good? If you answered yes to any of these questions you came to the right place because this innovative approach rewrites the book on epoxy. That’s right, TS-100 1 Part Epoxy won’t chalk, fade or yellow like two component epoxy and it won’t spider-web like Gel-Coat making it a favorite in rust preventative paint and marine restoration applications. Now you can use our exclusive 1 Part Epoxy in your direct to metal paint applications safely and economically without the need* for primer in many instances. TS 100 One Part Epoxy is a one of a kind, super-premium marine top coat that has its origins in government spec coatings. What makes it unlike typical urethane or epoxy paint is that it produces a film that remains both hard and flexible at the same time. Its silicone epoxy base allows high flexibility, heat resistance and UV stability while providing the excellent hardness, scuff resistance and chemical resistance you expect when you typically think of an epoxy or urethane.  Since its oxygen cured rather than catalyzed it holds its color and gloss longer, is easier to work with and less hazardous to the environment. No other product we are aware of has a wider range of application possibilities. TS 100 adheres to almost anything and it self levels like a dream. Brush it on and watch the brush marks disappear before your very eyes! Industry veterans recognize this product as being something very special. This waterproof rust inhibiting paint offers excellent resistance to chemicals, spilled fuel, brake fluid and acids. It is impact resistant to 500 PSI and is heat resistant to 350+ degrees. It is color-fast, non-chalking and resists cracking, chipping and peeling. Additionally, it covers up to three times the area of typical paint because it's maximum dry film thickness is only two mils. That’s half the thickness of a sheet of paper! If that were not enough, it typically covers in just one coat! What more could you ask of any coating? When used as an aluminum boat paint or fiberglass boat paint topside coating it provides exceptional performance and durability. 1 Part Epoxy provides outstanding adhesion to Steel, Iron, Wood, Composites, Ceramics, Vinyl, Aluminum, Fiberglass, Concrete and Masonry surfaces. It is easy to use because it can be brushed, rolled or sprayed and it cleans up easily. This lead-free formula is low VOC, is engineered to provide extraordinary performance, durability, and is non-toxic when dry so it is safe around children and animals. Acceptable for use as a topside coating, waterproof paint, rust preventative paint or protective coating for wood, aluminum boat paint and fiberglass boat paint applications. Compatible clear marine coatings include TS-1 Revolution Clear Marine Coating. Compatible topside coatings include TS-4 Urethane Reinforced Alkyd Marine Paints. Not recommended for use with TS-2 Urethane Marine Coating, TS-2 Urethane Marine Clear Coating, TS-6433 Ever-Last Epoxy Paint, TS-6433 Ever-Last Epoxy Clear Marine Coating or TS 527 Camo-Coat Camouflage Boat Paints.

Stats: Covers 400-500 square feet per gallon on porous surfaces such as concrete, up to 800 square feet on non porous surfaces. Dry to the touch in 2-4 hours. Pot life: Not applicable * Very high in solid content so it will require reduction in most applications. Compatible for electrostatic spray. Low temperature curing (as low as 40F.) Available in 200 stock marine paint colors. Custom colors available on request for an additional $5.00 per gallon. Available in quart, gallon and five gallon containers

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner or primer. Steel: TS 5679 Phos-Pro Rust Converting Cleaner, TS 695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any topside coating, bottom paint, marine varnish or brightwork varnishes.

Recommended primers: Concrete & masonry-TS 6390 Ever-Last Epoxy Primer or TS 664 Etching Primer. Wood-TS 664 Etching Primer. Fiberglass, aluminum and composite materials-TS 117 Pre-Wash Primer in combination with TS 664 Etching Primer. Steel & iron: TS 117 Pre-Wash Primer in combination with TS 664 Etching Primer or TS 900 Fabrication Primer.

Thin & clean up: Use only with factory recommended thinner, TS 101 Thinner. Clean all equipment thoroughly with TS 101 Thinner or TS 602 Mineral Spirits.

Accelerate/Harden: See TS-160 Accelerator/Hardener on SUPPLIES Page.

Reduce gloss: See TS-150 Gloss Reducer on SUPPLIES Page.

NOTE: Not an antifouling bottom paint. Recommend TS 700 Old Sailor Bottom Paint for antifouling paint duty.