$83.96

The secret is out on our revolutionary 1 Part Epoxy. This is our signature product, and we guarantee it to out perform all other epoxies, bar none! TS 100 One Part Epoxy is a one of a kind, super-premium coating that is absolutely unbeatable on concrete, masonry and tile floors. What makes it unlike anything else is that while it is a single component silicone based epoxy ester, which is cool and unusual all by it self, it has been reinforced with alkyd and urethane to produce a film that remains both exceptionally hard and flexible at the same time. Brush it on and watch the brush marks disappear before your very eyes! Its amazing! Industry veterans recognize this product as being something very special. TS 100 adheres to almost anything and dries to an exceptionally hard yet flexible high gloss finish. It self-levels like a dream, inhibits rust, waterproofs, is resistant to chemicals, spilled fuel, brake fluid and acids, is impact resistant to 500 PSI and is heat resistant to 350+ degrees. It is color-fast, non-chalking and resists cracking, chipping and peeling. Additionally, it covers three times the area of typical paint because it's maximum dry film thickness is only two mils. Thats half the thickness of a sheet of paper! To top it off it typically covers in just one coat! What more could you ask of any coating? TOP SECRET'S 1 Part Epoxy provides outstanding adhesion to Metal, Wood, Concrete, Masonry, Ceramic Tile and, Asphalt, surfaces. It is easy to use because it can be brushed, rolled or sprayed and it cleans up easily. This lead-free formula is low VOC, is engineered to provide extraordinary performance, durability, and is non-toxic when dry so it is safe around children and animals. For best results thin with TS 101 Thinner. Speed up dry times or harden with TS 160 Accelerator / Hardener. Reduce the gloss with the addition of TS-150 Gloss Reducer. Available stock colors or custom colors by request. Available in quart, gallon or five gallon cans.