Ever-Last Epoxy Primer is a two-component catalyst cured polyamide epoxy primer formulated to provide outstanding adhesion, hardness, durability and resistance to pool chemicals, acids, alkalis, solvents, salt and corrosion over a variety of substrates. It produces an incomparably hard fully submersible finish that has unequaled chemical resistance making it a favorite in swimming pool applications. It is specially formulated to out perform all one-part primers on concrete and metal substrates.

Use Ever-Last Epoxy Primer in high traffic, high abuse areas or where pool or other harsh chemicals are present. Recommended for use on ferrous metals, prepared steel, aluminum and wooden substrates. Suitable for use on all interior and exterior surfaces. It provides good performance and durability for many years.

Stats: Available as either a one or two gallon kit. Covers 300 square feet per gallon.  Dry to the touch in 3-4 hours, tack free in 8 hours, recoat in 24 hours. Pot life is 8 hours @ 70 degrees F.

Recommended preparation: For best results follow application instructions sheet provided with order. Remove old swimming pool paints, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner or primer. Steel: Where rust is evident TS-5679 Phos-Pro Rust Converting Cleaner. Etch Concrete, gunnite and aluminum with TS-695 Etching Cleaner. For added slip resistance in traffic areas add Gaco-Grip, Tred-Tex or aluminum oxide to the primer coat for a non skid surface.

Thin & clean up: Thinning not typically required. Use only with factory recommended thinner, TS-620 Thinner. Clean all equipment thoroughly with TS-620 Thinner. Clean up with TS-620 Thinner.