Etching Primer is unique because of its versatility and because of the unbreakable chemical bond it creates. It allows you to prime then paint virtually any surface associated with swimming pools or ponds. Very well like because of its effectiveness, ease of use, sandability and protective qualities over a wide variety of substrates. A hi-performance Phenolic Modified Alkyd Primer specially formulated for use with hard to prime surfaces such as gunnite, glazed tile, aluminum, fiberglass and plastic. Acceptable for use almost anywhere and most any application!

Etching Primer creates an unequaled etching bond to whatever it is applied to without mixing multiple components. It will not lift to lacquers, is fast drying and high solid content. It is a corrosion resistant primer that inhibits rust penetrates cracks and withstands saltwater. It protects corners and edges and resists exposure to the damaging effects of weather.

Intended for use as a primer coat for properly prepared surfaces. Use on any interior or exterior surface. Excellent for use in both fish pond and swimming pool  applications. Available in quart, gallon or five gallon cans. Color: White or Red Oxide. Finish is low sheen.

Stats: Coverage is approximately 300 square feet per gallon, depending on the texture and porosity of the surface. Dries to the touch in 30 minutes. Recoat in 2-4 hours. Apply by brush, roller or spray.

Recommended preparation: For best results follow application instructions sheet. Remove old swimming pool paints, loose scale, grease, oil and contaminates. Sand, grind, bead blast or power-wash prior to the application of any cleaner or primer. Steel: Where rust is evident TS-5679 Phos-Pro Rust Converting Cleaner. Etch Concrete, gunnite, tile and aluminum with TS-695 Etching Cleaner. For added slip resistance in traffic areas add Gaco-Grip, Tred-Tex or aluminum oxide to the primer coat for a non skid surface.

Thin & clean up: Use only with factory recommended thinner, TS-605 Thinner. Clean all equipment thoroughly with TS-605 Thinner. Clean up with TS-605 Thinner or TS-610 Lacquer Thinner.