Ever-Last Epoxy is a two component, high performance catalyst-cured epoxy paint. It provides excellent chemical resistance and hardness to equipment, infrastructure, tools, machines and manufactured goods in harsh or abusive environments. It provides unequaled adhesion, hardness, chemical resistance and is fully submersible making it a favorite in industrial paint applications. Use it wherever salt air, and abusive weather conditions require a hard, highly durable rust preventative protective epoxy coating. Provides outstanding service in virtually all interior or exterior applications. Intended for use on metal, wood, fiberglass, aluminum and composite materials. Use it in all industrial paint applications such as on manufactured goods, machinery, high traffic warehouse floors, control panels, cabinets, material handling equipment, lockers and tools. Excellent for refinishing water tanks and piping. When used as an aluminum paint or fiberglass paint it provides exceptional performance and durability. Ever-Last Epoxy can be self priming depending on type of substrate and application, however, a primer coat is typically necessary. Apply using brush, roller or spray (conventional, airless or electrostatic).

Stats: Covers 275-300 square feet per gallon on porous surface, up to 400 square feet on non porous surfaces. Dry to the touch in one hour, tack free in 8 hours, recoat in 24 hours. Pot life is 8 hours @ 70 degrees F. Available in 200 aircraft paint schemes. Custom colors are available on request. Available in low sheen, semi-gloss and gloss. Available in 1 gallon, two gallon and 5 gallon kits.

Recommended preparation: For best results remove old aircraft coatings, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or aircraft primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch fiberglass and aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any aircraft paints or primer.

Recommended primers: Wood-TS-664 Etching Primer. Fiberglass and aluminum materials-TS-117 Pre-Wash Primer in combination with TS-664 Etching Primer. Steel-TS-6390 Ever-Last Epoxy Primer. Best performance will be obtained when used over lacquer resisting primers including TS-664 Etching Primer and TS-6390 Ever-Last Epoxy Aircraft Primer. Recommend TS-1184 Zinc Chromate Primer for anti-corrosion protection.

Thin & clean up: Thinning not typically required. Use only with factory recommended thinner, TS-605 Thinner. Clean all equipment thoroughly with TS-605 Thinner. Clean up with TS-605 Thinner or TS-610 Lacquer Thinner.

Acceptable uses: aircraft paint schemes, aircraft finish, aircraft paint and coatings, aerospace coating, aircraft paint, aircraft paint colors, high performance aircraft coatings. For use with: Clear aircraft coatings, airplane paints and primers, airplane paint, aircraft primer, aircraft paint and coatings, aerospace coating, aircraft paint schemes, aircraft clear coating and high performance aircraft coatings.