|
TOP SECRET Aluminum Coating is an aluminum pigmented
alkyd. The color comes from finely ground aluminum particles.
There's so much aluminum in it you could open your own plating shop
with this stuff! It will actually conduct electricity there is so
much metal in it! A permanent, heat shield is created with the
addition of aluminum to the alkyd base. When used as an aluminum
coating or high heat paint it provides exceptional performance and
durability. Excellent for repairing rusted or deteriorated
galvanized metals. Outstanding for use as a rust preventative paint
or protective coating. It’s a semi gloss aluminum coating for
interior or exterior wood, masonry or new, rusted or damp metal that
can withstand dry temperatures up to 400 degrees F. In many
applications it will prime and finish in just one application. It is
resistant to grease, salt air, fungus, chemical fumes, gasoline,
moist oils and has excellent leafing qualities. A fast-drying,
easy-to-apply aluminum coating specially formulated to withstand
high temperatures without discoloring or breaking down. Its aluminum
pigmentation provides excellent rust preventative qualities to
industrial marine surfaces in harsh environments. It is ideal for
tools, equipment and structures subject to salt air environments.
Recommended for use on the interior and exterior of machinery,
vessels, engines, motors, roofs, radiators, smoke stacks, fuel and
oil storage tanks, metal railings, metal windows, cranes, piping and
structural steel. Not recommended for floors or continual water
immersion.
Stats: Covers 300-325 square feet at two mils dry. Dry to the touch
in 2-4 hours. Pot life: Not applicable * Very high in solid content
so it will require reduction in most applications. Low temperature
curing (as low as 20 F.) Available in quart, gallon and five gallon
containers. Satin finish.
Recommended preparation: For best results remove old aircraft
coatings, loose scale, grease, oil and contaminates. Sand, grind,
blast or power-wash prior to the application of any cleaner or
aircraft primer. Steel: TS-5679 Phos-Pro
Rust Converting Cleaner, etch fiberglass and aluminum with
TS-695 Etching Cleaner. All surfaces must be thoroughly dry
before the application of any aircraft paint schemes.
Recommended primers: Wood-TS-664 Etching
Primer. Fiberglass and aluminum materials-TS-117
Pre-Wash Primer in combination with TS-664 Etching Primer.
Steel-TS-6390 Ever-Last Epoxy Aircraft
Primer. Best performance will be obtained when used over
lacquer resisting primers including TS-664 Etching Primer and
TS-6390 Ever-Last Epoxy Primer. Recommend
TS-1184 Zinc Chromate Primer for anti-corrosion protection.
Thin & clean up: Use only with factory recommended thinner,
TS-605 Thinner. Clean all equipment
thoroughly with TS-605 Thinner.
NOTE: Acceptable uses: aircraft paint schemes,
aircraft finish, aircraft paint and coatings, aerospace coating,
aircraft paint, aircraft paint colors, high
performance aircraft coatings. For use with: Clear aircraft
coatings, airplane paints and
primers, airplane paint, aircraft primer, aircraft paint and
coatings, aerospace coating, aircraft paint schemes,
aircraft clear coating and high performance aircraft coatings.
|
