|
The
secret is out on TS-100 1 Part Epoxy. This easy to use protective
coating replaces hard to use multiple component epoxy and urethanes
in industrial applications. Its’ a one of a kind, super-premium
industrial coating that is excellent for use on machinery, tools,
equipment and on industrial infrastructure. A single component
Direct To Metal coating (DTM) that is durable and environmentally
friendly. 1 Part Epoxy won’t chalk, fade or yellow like two
component epoxy and it is non-toxic when dry making it a favorite in
performance coating and rust preventative paint applications. Now
you can use our exclusive 1 Part Epoxy in your direct to metal paint
applications safely and economically without the need* for primer in
many instances. 1 Part Epoxy is a one of a kind, super-premium
protective coating that produces a film that remains both hard
and flexible at the same time. Its silicone epoxy base allows
high flexibility, heat resistance and UV stability while providing
the excellent hardness, scuff resistance and chemical resistance you
expect when you typically think of an epoxy or urethane. Since its
oxygen cured rather than catalyzed it holds its color and gloss
longer, is easier to work with and less hazardous. No other product
we are aware of has a wider range of application possibilities. 1
Part Epoxy adheres to almost anything and it self levels like a
dream. Brush it on and watch the brush marks disappear before your
very eyes! Industry veterans recognize this product as being
something very special. A waterproof rust inhibiting paint that
offers excellent resistance to chemicals, spilled fuel, brake fluid
and acids. It is impact resistant to 500 PSI and is heat resistant
to 350+ degrees. It is color-fast, non-chalking and resists
cracking, chipping and peeling. Additionally, it covers up to three
times the area of typical paint because its maximum dry film
thickness is only two mils. That’s half the thickness of a sheet of
paper! If that were not enough, it typically covers in just one
coat! What more could you ask of any industrial paint? When used as
a heat resistant coating, metal coating, aluminum paint, pipe
coating or tank coating it provides exceptional performance and
durability. 1 Part Epoxy provides unequaled adhesion to Steel, Iron,
Wood, Composites, Ceramics, Vinyl, Aluminum, Fiberglass, Concrete
and Masonry surfaces. It is easy to use because it can be brushed,
rolled or sprayed and it cleans up easily. This lead-free formula is
low VOC, is engineered to provide extraordinary performance,
durability, and is non-toxic when dry so it is safe around children
and animals.
Stats: Covers 400-450 square feet per gallon on porous surfaces such
as wood, up to 800 square feet on non porous surfaces. Dry to the
touch in 2-4 hours. Pot life: Not applicable * Very high in solid
content so it will require reduction in most applications.
Compatible for electrostatic spray. Low temperature curing (as low
as 20 F.) Available in 200 stock aircraft paint colors. Available in
low sheen, semi-gloss and gloss. Custom colors available on request
for an additional $10.00 per container.
Recommended preparation: For best results remove old aircraft
coatings, loose scale, grease, oil and contaminates. Sand, grind,
blast or power-wash prior to the application of any cleaner or
aircraft primer. Steel: TS-5679 Phos-Pro
Rust Converting Cleaner, etch fiberglass and aluminum with
TS-695 Etching Cleaner. All surfaces must be thoroughly dry
before the application of any aircraft paints or primer.
Recommended primers: Wood-TS-664 Etching
Primer. Fiberglass and aluminum materials-TS-117
Pre-Wash Primer in combination with TS-664 Etching Primer.
Steel-TS-6390 Ever-Last Epoxy Primer.
Best performance will be obtained when used over lacquer resisting
primers including TS-664 Etching Primer and TS-6390 Ever-Last Epoxy
Aircraft Primer. Recommend TS-1184 Zinc
Chromate Primer for anti-corrosion protection.
Thin & clean up: Use only with factory recommended
thinner, TS-101 Thinner. Clean all equipment
thoroughly with TS-101 Thinner or TS-602
Mineral Spirits.
Accelerate/Harden: See TS-160
Accelerator/Hardener on SUPPLIES
Page.
NOTE: Acceptable uses: aircraft paint schemes,
aircraft finish, aircraft paint and coatings, aerospace coating,
aircraft paint, aircraft paint colors, high
performance aircraft coatings. For use with: Clear aircraft
coatings, airplane paints and
primers, airplane paint, aircraft primer, aircraft paint and
coatings, aerospace coating, aircraft paint schemes,
aircraft clear coating and high performance aircraft coatings.
Application Instructions
|
