|
Our
best selling and most popular industrial primer because of its
versatility, sandability and protective qualities over a wide
variety of substrates. A hi-performance Phenolic Modified Alkyd
Primer specially formulated for use with hard to prime surfaces such
as aluminum and fiberglass. Also acceptable for use with metal or
wood surfaces. Basically, you can use it almost anywhere and most
any application! TS 664 Etching Primer is a lacquer proof, fast
drying, high solid rust stopping primer that inhibits rust, is
resistant to salt spray and penetrates cracks around light rust and
mill scale. It protects corners and edges and resists exposure to
the damaging effects of weather. Intended for use as an aluminum
primer for properly prepared surfaces. Use on any interior or
exterior surfaces. Excellent for use on all fiberglass and aluminum
boats, aircraft and equipment. A premium-grade, high solid sandable
primer that not only acts as an effective rust preventative on steel
and iron substrates but should be viewed as an integral component of
any rust preventative coating system. Lacquer proof primer and
finish coats such as nitrocellulose lacquers may be applied directly
over it without the worry of lifting or wrinkling. Available in
quart, gallon or five gallon cans. Color: White or Red Oxide. Finish
is low sheen.
Stats: Dries to the touch in 30 minutes, tack free in 1 hour,
recoatable in 2 hours, dries hard in 4 hours. Apply by brush, roller
or spray. Coverage is approximately 300 square feet per gallon,
depending on the texture and porosity of the surface. Dries to the
touch in 30 minutes. Recoat in 8 hours. Apply by brush, roller or
spray.
Recommended preparation: For best results remove old aircraft
primer, aircraft paint, loose scale, grease, oil and contaminates.
Sand, grind, blast or power-wash prior to the application of any
cleaner. All surfaces must be thoroughly dry before the application
of any aircraft primer or aircraft coating
systems. Recommend the use of TS-117
Wash Primer in all aluminum aircraft paint applications.
Steel: TS-5679 Phos-Pro Rust
Converting Cleaner, etch fiberglass and aluminum with
TS-695 Etching Cleaner.
Thin & clean up: TS 605 Thinner.
Clean spills and tools immediately with TS
605 Thinner.
For use with most aerospace coatings, airplane paints and primers,
aircraft finish, aluminum aircraft paint, aircraft paint colors,
high
performance aircraft coatings, performance aircraft coating, high
performance aircraft, aircraft paint schemes.
|
