Aero-Lac is a premium fast drying, light weight nitrocellulose lacquer industrial finish favored for its beauty, light weight, ease of application and quick dry time. It has excellent depth, luster and durability and a wide variety of application possibilities. The very same product specified by the military, government agencies and subcontractors. Conforms to government specification numbers TT-L-20 and TT-L-32 so you know you are getting the best! Aero-Lac has been formulated as a premium non-metallic paint for industrial uses that will look new for years. It provides beautiful, durable and long lasting protection to a wide variety of metal, wood, plastic, carbon fiber and composite surfaces. Nitrocellulose has been added for quick drying and ease of use. Our formula is resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils. This product should not be used over bare metal. Best performance will be obtained when it is applied over metal surfaces properly pretreated and primed with lacquer resisting primer and a lacquer color coat.

Stats: Covers 400-500 square feet per gallon. Dry to the touch in 5 minutes, tack free in 12 minutes, recoatable in 1 hour, dries hard in two hours. Pot life: Not applicable * Available in 200 stock non metallic paint colors. Custom colors available on request for an additional $10.00 per gallon. Available in quart, gallon and five gallon containers. Low sheen, semi-gloss and gloss.

Recommended preparation: For best results remove old vehicle paint, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or automotive primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch bare aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any automotive coating system.

Recommended primers: Wood-TS-664 Etching Primer. Fiberglass, aluminum, steel and composite materials-TS-664 Etching Primer, TS-5672 Plastic Primer or TS-6390 Ever-Last Epoxy Primer.

Paint solvent & clean up: Use only with factory recommended thinner, TS-610 Lacquer Thinner. Clean all equipment thoroughly with TS-610 Lacquer Thinner.

Acceptable for use as an automotive finish, paint for trucks, auto paint, non metallic paint, automotive colors, body paint, car and truck paint, enamel paints, old vehicle paint, old car paint, truck paint, 4x4 paint, off road vehicle paint, urethane coating. Use with basecoat primer, automotive primer, acrylic coatings, automotive clear coating, body paint, clear automotive coating, lacquer resisting primer, non metallic paint, polyurethane coatings, urethane clear, urethane coating, auto paints, automotive finishes, non metallic paint for trucks, aliphatic urethane.