|
Property owners and facility maintenance managers love Anti-Graffiti
Coat because unwanted graffiti washes right off without the loss of
color, texture or gloss. It’s a non-sacrificing graffiti resistant
product that cleans easily. TS-610 Anti-Graffiti Coat works with
TS-602 Graffiti Cleaner to keep
concrete, stucco, masonry, wood, vinyl or metal looking its best.
We’ve spared no expense or resource in preparing this outstanding
product. Excellent for use in exterior paint applications where
there is a high risk of unwanted graffiti, corrosive chemicals,
smog, heavy grime and heavy traffic. Lab tests demonstrate that even
after 10 days of direct exposure to sulfuric acid there is no loss
of color or gloss! Anti-Graffiti Coat cleans easily and has superior
colorfastness than any exterior paint, bar none. It is highly
resistant to solvents, alkalis and dilute acids and is suitable for
use in all architectural applications. Use it with TS-602 Graffiti
Cleaner when removing unwanted graffiti, stains or grime. Provides
an exceptionally durable finish that offers outstanding gloss and
color retention in the harshest environments and in the most
difficult circumstances. Use it on structures, doors, bridges, out
buildings, fences, stairs or walkways. It creates a beautiful
chemical resistant finish that won’t fade or loose its gloss when
repeatedly scrubbed. Resists high heat (500F), chemicals, fuels and
staining agents.
Stats: Covers 400-500 square feet per gallon depending on surface
and specific application requirements. Dry to the touch in 30
minutes-1 hour. Mixing Ratio: 7:1 (by volume) with Part B (Induction
Time: 15 minutes) Pot life: 4 hours * It is supplied at spray
viscosity suitable for most conventional systems. Compatible for
electrostatic spray. Low temperature curing (as low as 20 F.)
Available in 200 exterior paint colors. Custom colors available on
request for an additional $10.00 per container. Available in low
sheen, semi-gloss and gloss.
Recommended preparation: For best results remove loose exterior
paint, scale, grease, oil and contaminates. Sand, grind, blast or
power-wash prior to the application of any cleaner or primer. Steel:
TS-5679 Phos-Pro Rust Converting Cleaner, etch concrete with
TS-695 Etching Cleaner
as seen on our SUPPLIES page.
All surfaces must be thoroughly dry before the application of any
industrial primer or industrial paints.
Recommended primers: Concrete & masonry-TS-6390
Ever-Last Epoxy Primer. Wood-TS-664 Etching Primer.
Fiberglass, aluminum and composite materials-TS-117
Pre-Wash Primer in combination with TS-664 Etching Primer.
Steel & iron: TS-664 Etching Primer or
TS-900 Fabrication Primer. Best performance will be obtained
when used over lacquer resisting primers including TS-664 Etching
Primer and TS-900 Fabrication Primer.
Thin & clean up: Use only with factory recommended thinner,
TS-620 Thinner Reducer. Clean all
equipment thoroughly with TS-620 Thinner Reducer or
TS-610 Lacquer Thinner.
Acceptable for use as
enamel paint, exterior paint, exterior house paint, interior paint
colors, Exterior House Paints and paint colors. Use with
anti-graffiti Clear, exterior paint, exterior Primer, exterior house
paint, exterior house paints, exterior paint colors, interior paint
colors, interior primer, latex paint, latex interior paints,
Lifetime Interior Paint, Lifetime Exterior House Paints, primer, Oil
Based Primer, water sealant and water sealers
|
