TS-102 Stain Blocking Primer

View/Change/Complete your order:

Stop mold, mildew, tannin bleed and other common stains in their tracks with Top Secrets exclusive stain blocking formula. A high hiding enhanced acrylic latex primer, formulated to block out most stains. Top Secret’s Stain Blocking Primer is specially formulated for use with all interior and exterior house paints. Stain-Blocking Primer features excellent adhesion to chalky surfaces and hard smooth materials. Provides a uniformly sealed surface designed to maximize paint performance while stopping mold and mildew.  Creates a high film build up making it the perfect choice to seal off stains. Use it to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Exterior: Intended for use on all unpainted and previously painted surfaces including wood siding, shakes, trim, concrete, brick, stucco, cement composite siding, and clean metal surfaces. Interior: Intended for use on all unpainted and previously painted surfaces including walls, woodwork, ceilings, plaster, drywall, and masonry surfaces.

Note: Severe stains may require two coats. Allow 12 hours drying time between coats for maximum stain blocking. Coverage is approximately 200-300 square feet. Easy application, brush, roll or spray it on. Cleans up with water. Dries to the touch in one hour. Color: White. Apply by brush, roller or spray. Available in quart, gallon or five gallon cans.

Recommended preparation: For best results remove old paint, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to application. When painting cement or coating concrete, surfaces must be thoroughly dry before the application of and cement paint application.

Thin & clean up: Thins and washes up easily with water.

Acceptable for use as: