|
Government Spec Paints
|
|
|
 |
A-A-1546 Rubbing Varnish (Clear Gloss) |
$Call |
Rubbing Varnish (Clear Gloss) For brushing on interior wood and metal furniture where a rubbed finish is desired. (Made to Order 50 gal min)
|
|
 |
A-A-1800 Spar Varnish (Clear) |
$Call |
Spar Varnish (Material is Clear) For exterior wood and metal surfaces.
|
|
 |
DOD-E-1115C Interior/Exterior White Enamel |
$Call |
|
|
 |
DOD-E-1265D Exterior Alkyd Enamel Ocean Gray (formula #17) |
$Call |
| |
|
 |
DOD-E-18210B Interior Red Deck Enamel (formula #23) |
$Call |
| |
|
 |
DOD-E-18214B Interior Dark Green Deck Enamel (formula #19) |
$Call |
| |
|
 |
DOD-E-24607 Chlorinated Alkyd Resin Enamel |
$Call |
Chlorinated Alkyd Resin Enamel Fire Retardant Enamel for marine use. For use on primed or metal bulkheads. (Available in wide range of colors)
|
|
 |
DOD-E-698C Black Shipboard Alkyd Enamel (formula #24) |
$Call |
| |
|
 |
DOD-E-699D Exterior Deck Gray Enamel (formula #20) |
$Call |
| |
|
 |
DOD-P-15144B/MIL-E-15144B Formula #34 Binder For Anti-Sweat Coatings |
$Call |
Formula #34 Binder for Anti-Sweat Coatings Intended for use with expanded vermiculite or ground cork to provide anti-sweat protection on piping and bulkheads.
. |
|
 |
DOD-P-21035A High Content Zinc Dust Paint |
$Call |
| |
|
 |
DOD-P-23236A Fuel & Salt Water Ballast Paint Coating System |
$Call |
| |
|
 |
DOD-P-24380A Chlorinated Rubber - Solvent Type Gloss Black |
$Call |
| |
|
 |
DOD-R-18708B Exterior Shipboard, Rust Arresting Coating Gray (formula #123G) |
$Call |
| |
|
 |
MIL-C-22750 Type 1 Epoxy Coating |
$Call |
Type I Epoxy Coating 2-Component epoxy coating for metal, wood, masonry & marine (Spec. #23538 Yellow) areas such as engine rooms, machinery, high traffic floors, deck houses, holds, passageways, cabinets, food handling equipment, lockers. Also
|
|
 |
MIL-C-4556D Two Coat Epoxy Resin Kit |
$Call |
| |
|
 |
MIL-C-6799H Exterior Multi-Coating System |
$Call |
| |
|
 |
MIL-C-83286B 2-Part Aliphatic Isocyanate Urethane |
$Call |
| |
|
 |
MIL-C-8514C Smooth Finish Resin Acid Pretreatment |
$Call |
| |
|
 |
MIL-D-15090D Light Gray Equipment Enamel |
$Call |
| Light Gray Equipment Enamel Navy Formula III, Solvent Base Semi-Gloss Enamel. For shipboard use as a topcoat on equipment, machinery, furniture and electrical equipment, such as switchboard installations. |
|
 |
MIL-D-5549B Cellulose Acetate Butyrate Clear Dope |
$Call |
|
. |
|
 |
MIL-E-15129 Interior/Exterior Alkyd High Gloss |
$Call |
| |
|
 |
MIL-E-24635 Silicone Alkyd Copolymer Enamel |
$Call |
Silicone Alkyd Copolymer Enamel Weather-resistant enamel for interior or exterior metal surfaces. (Available in wide range of colors, gloss and semi-gloss finishes).
|
|
 |
MIL-E-2638D Gasoline and Water Resistant Vinyl Resin |
$Call |
| |
|
 |
MIL-P-15931E Vinyl Antifouling Paint |
$Call |
| |
|
 |
MIL-P-24441 Polyamide Black Topcoat (formula 153) |
$Call |
Polyamide Black Topcoat (Formula 153) For immersion and non-immersion chemical-resistance service and as a good marine environment protective topcoat. (Available in black).
|
|
 |
MIL-P-24441 Polyamide Dark Gray Topcoat (formula 154) |
$Call |
| |
|
 |
MIL-P-24441 Polyamide Dark Gray Topcoat (formula 155) |
$Call |
| |
|
 |
MIL-P-24441 Polyamide Gray Topcoat (formula 151) |
$Call |
Polyamide Gray Topcoat (Formula 151) For immersion and non-immersion chemical-resistance service and as a good marine environment protective topcoat. (Available in gray).
|
|
 |
MIL-P-24441 Polyamide Interior/Exterior Topcoat #50 Gray (formula 157) |
$Call |
| |
|
 |
MIL-P-24441 Polyamide Interior/Exterior Topcoat Red (formula 156) |
$Call |
| |
|
 |
MIL-P-24441 Polyamide White Topcoat (formula 152) |
$Call |
Polyamide White Topcoat (Formula 152) For immersion and non-immersion chemical-resistance service and as a good marine environment protective topcoat. (Available in white).
|
|
 |
TT-E-1593 High Performance Silicone Alkyd Enamel |
$Call |
High-Performance Silicone Alkyd Enamel For wood, concrete, or metal surfaces. (Available in wide range of colors).
|
|
 |
TT-E-2784 Exterior Gloss Acrylic Enamel (Type1) |
$Call |
Exterior Gloss Acrylic Enamel (Type I) For exterior wood, millwork, primed metal or trim.
|
|
 |
TT-E-489 Quick Dry Enamel (8-hour dry) |
$Call |
Quick Dry-Enamel (8-Hour Dry) For cabinets, furniture, tools, machinery, toys, etc. (Available in whites and tints).
More... |
|
 |
TT-E-496B Bituminous Base, Heat Resistant, Black Coating (400F) |
$Call |
| |
|
 |
TT-E-506 Gloss Alkyd Enamel |
$Call |
Gloss Alkyd Enamel For cabinets, furniture tools, machinery, toys, etc
|
|
 |
TT-E-508 Semi-Gloss Alkyd Enamel (interior) |
$Call |
Semi-Gloss Alkyd Enamel (Interior) For interior walls, ceilings, millwork, cabinets, trim, or furniture. (Available in whites and tints).
|
|
 |
TT-E-509C (A-A-50574) Semi-Gloss Alkyd Enamel (odorless) |
$Call |
(A-A-50574) Semi-Gloss Alkyd Enamel (Odorless) For bathroom or kitchen walls, millwork, cabinets, trim, furniture or as a marine enamel. (Available in whites and tints).
|
|
 |
TT-P-102F (A-A-3057) Alkyd Semi-Gloss Enamel |
$Call |
(A-A-3057) Alkyd Semi-Gloss Enamel For bathroom or kitchen walls, millwork, cabinets, trim, furniture, sash, body, trim, gutters, or as a marine enamel. (Available in whites and tints).
|
|
 |
TT-P-19 E-Z-ON Exterior Acrylic Latex |
$Call |
E-Z-ON Exterior Acrylic Latex For exterior wood siding, trim, or masonry surfaces.
|
|
 |
TT-P-1952D "Fast Dry" Acrylic Latex Traffic Paint |
$Call |
"Fast-Dry" Acrylic Latex Traffic Paint For marking pavement, airfields, or traffic-bearing surfaces where faster dry is needed. (Available in white, yellow, black, or red).
|
|
 |
TT-P-286 Heat Resistant Aluminum Paint (1200F) |
$Call |
| |
|
 |
TT-P-28G High Heat Resistant Aluminum |
$Call |
High Heat Resistant Aluminum For marine use, radiators, boilers, exhaust stacks, tools, or industrial equipment.
|
|
 |
TT-P-29 Interior Acrylic Flat Latex |
$Call |
Interior Acrylic Flat Latex For interior walls and ceilings. (Available in whites and tints).
|
|
 |
TT-P-30 Alkyd Flat Wall Enamel |
$Call |
Alkyd Flat Wall Enamel For interior walls, ceilings, or millwork. (Available in whites and tints).
|
|
 |
TT-P-38D Ready Mixed Aluminum |
$Call |
Ready-Mixed Aluminum For use on exterior surfaces exposed to salt atmospheric and brine conditions and also for use on interior surfaces.
|
|
 |
TT-P-85E Fast Dry Zone Marking Coating (Alkyd) |
$Call |
Fast-Dry Zone Marking Coating (Alkyd) For exterior concrete, asphalt, or brick and interior concrete, wood, or metal. (Available in white, black, yellow, red, or blue).
|
|