|
TS-66 Supreme Urethane-Gallon
|
Quart A&B
List: $75.95
Our Price: $60.76
Half Gallon A&B
List: $115.95
Our Price: $92.76
Gallon A&B
List: $215.95
Our Price: $172.76
|
Key Features |
Recommendations |
Description |
- Features lower VOC and higher solid content for increased build.
- Fast tack, dry and cure time.
- Provides unequaled resistance to corrosive chemicals, dilute acids and strong cleaners.
- Excellent adhesion and hardness.
- Outstanding gloss and color retention.
- Withstands heat to 500F.
- Levels nicely.
- 4-6 hour pot life once mixed.
|
INTENDED USE:
Commercial or consumer interior / exterior.
SURFACES:
Previously painted surfaces, porcelan, ferrous and nonferrous metals, concrete, drywall, plaster, wood, Formica, laminated materials, masonry, brick, composite materials and synthetics.
USES:
Countertops, appliances, fixtures, cabinets, sinks, etc.
THINNER:
TS-605 Synthetic Thinner.
APPLICATION:
Brush, roll or spray. |
Supreme Urethane is a two-component acrylic polyurethane finish coating that produces unequaled results in a wide variety of applications. A commercial grade high solid content fine finish coating that produces a high build finish. It is well suited for production work since it sets up fast, dries and cures quickly without runs, sags or blemishes. Offers unequalled resistance to staining agents, chemicals, high heat, abrasions and impacts. Excellent color and gloss retention. Approved for food service applications. Covers up to 300 square feet per gallon. Available in 100 colors and clear. |
|
|
|
|
TS-100 Silicone Epoxy - Gallon
|
Quart
List: $49.95
Our Price: $39.96
Half-Gallon
List: $74.95
Our Price: $59.96
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Easy to use low VOC low odor no-mix product.
- Acceptable for use as appliance paint, countertop finish, showerstalls and use on fixtures. Produces a hard yet flexible finish.
- Approved for food service.
- Provides a high level of chemical resistance.
- High adhesion with good hardness.
- Colorfast and gloss retentive.
- Withstands heat to 400F.
- Self-levels remarkably well.
|
INTENDED USE:
Commercial, professional and consumer use interior/exterior.
SURFACES:
Previously painted surfaces, porcelan, ferrous and nonferrous metals, concrete, drywall, plaster, wood, Formica, laminated materials, masonry, brick, composite materials and synthetics.
USES:
Countertops, appliances, fixtures, cabinets, sinks, backboards, etc.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
TS-100 Tub, Sink, Tile Countertop Refinishing Instructions |
Silicone Epoxy is our signature product. A unusually easy to use resin blend that produces extraordinary results in a wide variety of applications. Features silicone-alkyd combined with epoxy-ester which produces a finish that is both hard and flexible at the same time. It sets up fast without runs, sags or blemishes. It offers a high level of resistance to staining agents, chemicals, harsh cleaners, high heat, abrasions and impacts with excellent color and gloss retention. Offers unequalled performance where standing water, grease, oil or intense UV are regularly present. Easy to use making it a favorite of Do-it-yourserlers. Approved for food service applications. Professional quality, easily out performs hardware store countertop finishes. Covers up to 400 square feet per gallon. Available in 100 colors and clear. A minimum of two coats typically required over the recommended primer. |
|
|
|
|
