|
TS-2 Hard-Shell Urethane-Gallon
|
Quart A&B
List: $65.95
Our Price: $52.76
Half Gallon A&B
List: $99.95
Our Price: $79.96
Gallon A&B
List: $186.95
Our Price: $149.56
|
Key Features |
Recommendations |
Description |
- Government spec product suitable for commercial-industrial use.
- Unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
- Waterproof.
- Excellent hardness.
- High adhesion.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Withstands high heat, cracking, peeling and chipping.
- Self levels.
- 4-6 hour pot life once mixed.
|
INTENDED USE:
Government, commercial, industrial and manufacturing.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Machinery, equipment, tools, tanks, pipelines, chemical splash zones, offshore drilling rigs, aerospace, vehicles, bridges and infrastructure.
THINNER:
TS-620 Blended Thinner.
APPLICATION:
Brush, roll or spray.
|
Hard-Shell Urethane is a government spec two-component polyurethane industrial coating that performs according to specification number MIL-P-85285. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Covers up to 400 square feet per gallon. Available in 100 colors and clear. |
|
|
|
|
TS-4 Urethane Reinforced Alkyd-Gallon
|
Quart
List: $35.95
Our Price: $28.76
Gallon
List: $99.95
Our Price: $79.96
5 Gallon
List: $489.95
Our Price: $391.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial use.
- Good resistance to chemicals dilute acids and alkalis.
- Waterproof.
- Good adhesion, hardness and UV resistance.
- Colorfast gloss retentive.
- Withstands high heat, cracking, peeling and chipping.
|
INTENDED USE:
Commercial industrial.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Weather resistant industrial paint, machinery, equipment, tools, furniture, aerospace, vehicles.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
|
Urethane Reinforced Alkyd is a durable industrial alkyd enamel finish fortified with urethane to enhance long term performance. It is versatile and easy to use. It is acceptable for use where standing water, grease, oil or high heat is present. Withstands intense UV in exterior applications. Offers a high level of adhesion with good flexibility, hardness and chemical resistance. It levels nicely makiing it a good choice where spray restrictions are in place. Provides good color and gloss retention. Covers up to 300 square feet per gallon. Available in 100 colors. |
|
|
|
|
TS-10 Aqueous Epoxy-Gallon
|
Quart
List: $54.95
Our Price: $43.96
Gallon
List: $153.95
Our Price: $123.16
5 Gallon
List: $759.95
Our Price: $607.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial use.
- Good resistance to chemicals, dilute acids and alkalis.
- Good adhesion, hardness and durability.
- Brushable formula self levels nicely.
- Withstands cracking, peeling and chipping.
|
INTENDED USE:
Commercial industrial paint.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Weather resistant industrial paint, machinery, equipment, tools, furniture, vehicles.
THINNER:
Water.
APPLICATION:
Brush, roll or spray.
|
Aqueous Epoxy rewrites the book on epoxy itself. It is the first single-stage water-based epoxy that is brushable and self-leveling. People are talking about it. It has been said it would self level if it was applied with a push-broom! An excellent choice where spray restrictions are in place. It offers spectacular leveling properties when brushed, rolled or sprayed. The finish is surprisingly smooth and soft in appearance yet rock-hard and durable. Engineered to brush beautifully, build better and displace rust causing moisture and air as it cures making it acceptable for direct to metal applications. Available in 100 colors. |
|
|
|
|
TS-66 Supreme Urethane-Gallon
|
Quart A&B
List: $75.95
Our Price: $60.76
Half Gallon A&B
List: $115.95
Our Price: $92.76
Gallon A&B
List: $215.95
Our Price: $172.76
|
Key Features |
Recommendations |
Description |
- Recently updated government spec formula.
- Features lower VOC and higher solid content for increased build.
- Provides unequaled resistance to corrosive chemicals, spilled fuel, dilute acids and solvents.
- Waterproof long term.
- Excellent hardness.
- Outstanding UV resistance, colorfast gloss retentive.
- Withstands heat to 500F.
- Self levels nicely.
- 4-6 hour pot life once mixed.
|
INTENDED USE:
Government, commercial, industrial and manufacturing.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Machinery, equipment, tools, tanks, pipelines, chemical retention areas, offshore drilling rigs, aerospace, vehicles, bridges and infrastructure.
THINNER:
TS-605 Synthetic Thinner.
APPLICATION:
Brush, roll or spray.
|
Supreme Urethane is a government spec two-component polyurethane industrial coating that performs according to specification number MIL-P-85285. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequalled performance in a wide variety of categories including chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Covers up to 300 square feet per gallon. Available in 100 colors and clear. |
|
|
|
|
TS-100 Silicone Epoxy - Gallon
|
Quart
List: $49.95
Our Price: $39.96
Half-Gallon
List: $74.95
Our Price: $59.96
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Good hardness.
- High adhesion.
- Unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Self-levels remarkably well.
|
INTENDED USE:
Commercial, industrial and manufacturing.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Machinery, equipment, tools, tanks, pipelines, chemical splash zones, aerospace, vehicles, bridges and infrastructure.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
TS-100 Application Instructions
|
Silicone Epoxy is our signature product. A unique resin blend that produces extraordinary results in a wide variety of applications. Silicone-alkyd combined with epoxy-ester produces a finish that is both hard and flexible at the same time. Offers unequalled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion, hardness, chemical resistance and resistance to high heat combined with outstanding color and gloss retention. Intended for use where intense UV, high heat, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Covers up to 400 square feet per gallon. Available in 100 colors and clear. |
|
|
|
|
TS-103 Ready-Mixed Aluminum-Gallon
|
Quart
List: $47.95
Our Price: $38.36
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Hard to find Government spec formula.
- Colored entirely by micro-ground aluminum particles.
- Withstands heat to 400F.
- Use it to repair rusted or deteriorated galvanized metal.
- Colorfast gloss retentive.
- Resists cracking, peeling and chipping.
|
INTENDED USE:
Government, commercial, industrial and manufacturing.
SURFACES:
Wood, fiberglass, synthetic materials and all metals.
USES:
Machinery, equipment, tools, tanks, pipelines, chemical splash zones, aerospace, vehicles, bridges and infrastructure.
THINNER:
Thin with TS-605 Thinner.
APPLICATION:
Brush, roll or spray.
|
Ready-Mixed Aluminum is a tough industrial alkyd enamel paint entirely pigmented by micro-ground aluminum particles. Meets government specification number TT-P-38-D. A fast drying, easy-to-apply aluminum paint specially formulated to withstand high temperatures without discoloring or breaking down. Its aluminum pigmentation provides excellent rust preventative qualities to surfaces subject to harsh industrial environments. A permanent, heat shield is created with the addition of aluminum to the alkyd base. Excellent for repairing rusted or deteriorated galvanized metals. Use it as a rust preventative protective coating. Finish is a semi-gloss aluminum flake in appearance. Withstands dry temperatures up to 400 degrees F. |
|
|
|
|
TS-105 Boiler Coat-Gallon
|
Quart
List: $58.95
Our Price: $47.16
Gallon
List: $164.95
Our Price: $131.96
5 Gallon
List: $814.95
Our Price: $651.96
|
Key Features |
Recommendations |
Description |
- Government spec formula.
- Withstands heat to 1100 F.
- Good resistance to corrosive chemicals, spilled fuel, and battery acid.
- No primer required.
- High adhesion, good hardness and UV resistance.
|
INTENDED USE:
Government, commercial, industrial and manufacturing.
SURFACES:
Iron and steel.
USES:
Boilers, tanks, stacks, bar-B-ques, machinery, pipelines, aerospace and vehicles.
THINNER:
Thin with TS-101 Thinner.
APPLICATION:
Brush, roll or spray.
|
Boiler-Coat allows you to turn the heat up all the way to 1200F! Meets government specification number TT-P-28G. A direct to metal (DTM) silicone based coating that prevents rust on any exterior or interior surface that is subject to intense heat. It is a ready mixed silicone resin vehicle based coating specifically developed to meet today’s demand for superior heat resistance and corrosion control. It is a fast drying easy-to-apply high heat paint specially formulated to withstand high temperatures without losing its luster, discoloring or breaking down. Dries to a matte finish. Aluminum or black color. |
|
|
|
|
TS-200 Mono-Epoxy-Gallon
|
Half-Gallon
List: $79.95
Our Price: $63.96
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Easy to use no mix formula.
- Long term waterproof finish.
- Good chemical resistance.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Low odor.
- Produces a nontoxic finish.
|
INTENDED USE:
Commercial, industrial and manufacturing.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Machinery, equipment, tools, floors, tanks, pipelines, chemical splash zones, aerospace and vehicles.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
TS-200 Application Instructions
|
Mono-Epoxy is a new generation epoxy-ester industrial paint that eliminates the need for mixing multiple components. It utilizes oxygen curing rather than two-component catalyst-curing making it easier to use. It can be used in hot and cold climates (-40F – 350F) and areas subject to standing standing water. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Covers up to 300 square feet per gallon. Available in 100 colors and clear. |
|
|
|
|
TS-905 Aquapoxy-Gallon
|
1 Gallon A&B
List: $219.95
Our Price: $175.96
4 Gallon A&B
List: $869.95
Our Price: $695.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial use.
- Eco-friendly Zero VOC odorless product.
- Long pot life makes it easy to use.
- Surface tolerant breathable formula.
- Excellent chemical resistance.
- High adhesion.
- Excellent hardness.
- Self-leveling finish.
- Self priming on concrete.
|
INTENDED USE:
Commercial, industrial and manufacturing use.
SURFACES:
Concrete, masonry, synthetic materials and all metals.
USES:
Machinery, equipment, tools, tanks, floors and chemical splash zones.
THINNER:
Water.
APPLICATION:
Brush, roll or spray.
TS-905 Application Instructions |
Aquapoxy utilizes the latest in modern resin technology. It is a catalyst-cured epoxy finish coating that produces excellent results without harming you or the environment. And it’s tough! It employs breathable resin technology to produce an exceptionally surface tolerant highly durable finish. Adhesion, chemical resistance, hardness and long term durability are all impressive! Intended for use where heavy traffic, corrosive chemicals, impacts and abrasions are present. Covers up to 250 square feet per gallon. |
|
|
|
|
TS-2032 Aero-Lac-Gallon
|
Gallon
List: $104.95
Our Price: $83.96
5 Gallon
List: $514.95
Our Price: $411.96
|
Key Features |
Recommendations |
Description |
- Government spec formula.
- Nitrocellulose added for quick drying and ease of use.
- Resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils.
- Highly durable finish.
|
INTENDED USE:
Government, commercial industrial use.
SURFACES:
Wood and most metals.
USES:
Weather resistant industrial paint, machinery, equipment, tools, furniture, cabinets, aerospace, vechiles.
THINNER:
Lacquer Thinner.
APPLICATION:
Best when sprayed.
|
Aero-Lac is a premium grade nitrocellulose lacquer that meets specification numbers TT-L-20 and TT-L-32 so you know you are getting the best! Favored for its beauty, light weight and ease of application. Nitrocellulose has been added for quick drying and ease of application making it suitable for production work. It has excellent depth, luster, durability and a wide variety of application possibilities. A highly versatile product that provides beauty, durability and long lasting protection. Our formula is resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils. This product should not be used over bare metal. For best results apply over properly prepared and primed surfaces. Available in 100 colors and clear. |
|
|
|
|
TS-5000 Zinc-Plate-Gallon
|
Quart
List: $107.95
Our Price: $86.36
Gallon
List: $299.95
Our Price: $239.96
|
Key Features |
Recommendations |
Description |
- Hard to find government spec formula.
- Weight solids 81%.
- Use either as a primer or finish coating.
- Heavy zinc formula provides unequaled corrosion control.
- Withstands high heat.
- Outstanding resistance to rust, electrolysis and weathering.
|
INTENDED USE:
Government, industrial, marine and commercial use.
SURFACES:
Steel, iron and galvanized surfaces.
USES:
Corrosion control on ferrous metals.
THINNER:
TS-605 Synthetic Thinner.
APPLICATION:
Airless or conventional spray. Airless tips should be approximately .027 inch orifice. Covers 225-250 square feet per gallon.
|
Zinc-Plate is a heavy zinc corrosion control coating that meets government spec specification number A-9-73. It can be used as either a heavy zinc primer or as a rust preventative protective system by itself. A combination Organic-Inorganic Zinc Rich formulation supplied ready-mixed with Zinc Dust and Vehicle together. Utilizes special components that produce a superior mechanical and chemical bond. Provides outstanding resistance to rust, electrolysis, weathering and high heat. Intended for use on bare ferrous metals. May be top coated with most vinyl coatings. Zinc color. Weighs 22 lbs. per gal. |
|
|
|
|
TS-6433 Ever-Last Epoxy-Gallon
|
1 Gallon A&B
List: $209.95
Our Price: $167.96
2 Gallon
List: $405.95
Our Price: $324.76
|
Key Features |
Recommendations |
Description |
- Government spec formula suitable for commercial-industrial or residential use.
- Excellent resistance to corrosive chemicals, spilled fuel, and battery acid.
- Waterproof long term.
- High adhesion.
- Excellent hardness.
- Produces an exceptionally durable finish.
- 4-6 hour pot life once mixed.
|
INTENDED USE:
Government, commercial, industrial and manufacturing.
SURFACES:
Concrete, masonry, wood, fiberglass, synthetic materials and all metals.
USES:
Machinery, equipment,tools, tanks, pipelines, chemical splash zones, offshore drilling rigs, aerospace, vechiles, bridges and infrastructure.
THINNER:
Thin with TS-605 Thinner.
APPLICATION:
Brush, roll or spray.
TS-6433 Floor Application Instructions
|
Ever-Last Epoxy is a two component polyamide epoxy finish coating for heavy-duty applications. A government spec formula that performs according to specification number MIL-C-22750. Use Ever-Last Epoxy wherever there is high abuse, motorized traffic, corrosive chemicals, spilled fuel, oil or in extreme weather conditions. Offers excellent performance in a wide variety of categories including adhesion, hardness, chemical resistance, acids, alkalis, high impacts and abrasions are often present. Will not pick up to hot tires. Covers up to 300 square feet per gallon. Available in 100 colors and clear. |
|
|
|
|
