|
TS-100-10 Peel Stopping Primer-Gallon
|
Gallon
List: $55.95
Our Price: $44.76
5 Gallon
List: $259.95
Our Price: $207.96
|
Key Features |
Recommendations |
Description |
- Stops paint from peeling long term.
- May be applied directly to peeling paint.
- Produces a highly flexible membrane.
- Easy to use water based formula.
- Works with any water based paint.
- Acceptable for interior or exterior use.
|
INTENDED USE:
Commercial and consumer interior and exterior use.
SURFACES:
Bare and previously painted surfaces including drywall, wood siding, shakes, trim, concrete, brick, stucco, cement composite siding, and clean metal.
USES:
Walls, siding, paneling, woodwork, ceilings, railings, millwork, fences, and trim.
THINNER:
Water.
APPLICATION:
Spray, brush or roll. |
Peel-Stopping Primer is your insurance policy against peeling paint. It is the solution to the old problem of peeling paint! It works by forming a flexible membrane that glues down old peeling, blistering paint creating a sound base for the new finish coat. Recommended for painted surfaces where peeling, cracking, blistering and chalking have been a problem previously. Use it to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Get it right this time with Peel-Stopping Primer and forget it! Specifically formulated for use with TS-137 and TS-138 Hard-Shell Interior and Exterior Paints. Color: White. Covers up to 300 square feet per gallon. |
|
|
|
|
TS-102 Stain Blocking Primer-Gallon
|
Gallon
List: $105.95
Our Price: $84.76
5 Gallon
List: $509.95
Our Price: $407.96
|
Key Features |
Recommendations |
Description |
- Use it on most any surface.
- Stops mold, mildew and tannin stains.
- Prevents new stains.
- Produces a tenacious bond.
- Fast drying.
- Recoatable in hours.
- High build.
- Resists cracking, peeling and chipping.
|
INTENDED USE:
Commercial and consumer interior and exterior use.
SURFACES:
Bare and previously painted surfaces including drywall, wood siding, shakes, trim, concrete, brick, stucco, cement composite siding, and clean metal.
USES:
Walls, ceilings, railings, millwork, fences, and trim.
THINNER:
Water.
APPLICATION:
Spray, brush or roll. Severe stains may require two coats. Allow 12 hours drying time between coats for maximum stain blocking. |
Stain Blocking Primer stops mold, mildew, tannin bleed and other common stains from showing through. A high hiding enhanced acrylic latex primer, formulated to block out most stains. Features excellent adhesion to chalky surfaces and hard smooth materials. Provides a uniformly sealed surface designed to maximize paint performance while stopping mold and mildew. Produces good film build up making it the perfect choice to seal off stains. Use it to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Color: White. Coverage is approximately 200-300 square feet. |
|
|
|
|
TS-204 Sandable Latex Primer-Gallon
|
Gallon
List: $49.95
Our Price: $39.56
5 Gallon
List: $229.95
Our Price: $183.96
|
Key Features |
Recommendations |
Description |
- Sands without gumming or clogging sandpaper like typical latex.
- May be applied directly to previously painted surfaces.
- Produces a sound base coat.
- Easy to use water based formula.
- Works with any water based paint.
- Acceptable for interior or exterior use.
|
INTENDED USE:
Commercial and consumer interior and exterior use.
SURFACES:
Bare and previously painted surfaces including drywall, wood siding, shakes, trim, concrete, brick, stucco, cement composite siding, and clean metal.
USES:
Walls, ceilings, railings, millwork, fences, and trim.
THINNER:
Water.
APPLICATION:
Spray, brush or roll. |
Sandable Latex Primer is the right primer to use when you want to sand to a glass-like finish indoors or outdoors. It is a high-hiding sandable latex primer, formulated to provide excellent adhesion and holdout without gumming up or clogging sandpaper. It is fast drying and easy to use. Your finish coat will last longer and cover better when using this product. Use to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Color: White. Coverage is approximately 300 square feet per gallon. |
|
|
|
|
TS-307 Multi-Purpose Oil Based Primer-Gallon
|
|
Gallon
List: $89.95
Our Price: $71.96
5 Gallon
List: $429.95
Our Price: $343.96
|
Key Features |
Recommendations |
Description |
- Stops mildew staining.
- Prevents tannin bleeding and pitch stains.
- May be applied directly to previously painted surfaces.
- Produces a sound base coat.
- Works with oil bases and water based paint.
- Acceptable for interior or exterior use.
|
INTENDED USE:
Commercial and consumer interior and exterior use.
SURFACES:
Bare and previously painted surfaces including drywall, wood siding, shakes, trim, concrete, brick, stucco, cement composite siding, and clean metal.
USES:
Walls, ceilings, railings, millwork, fences, and trim.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Spray, brush or roll. |
Multi-Purpose Oil Base Primer is a good way to begin your project when knot discoloration, pitch or tannin bleeding is a concern. This oil-alkyd formulation gives this product excellent penetration over all wood surfaces. It has exceptional hide characteristics locking out stains permanently. It resists mildew growth for extra protection and longevity. Use it to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Acceptable for use with either oil based or waterborne paints. Color: White. Coverage is approximately 300 square feet per gallon. |
|
|
|
|
TS-401 Interior Vapor-Guard Primer-Gallon
|
Gallon
List: $59.95
Our Price: $47.96
5 Gallon
List: $279.95
Our Price: $223.96
|
Key Features |
Recommendations |
Description |
- Protects against interior moisture transmission.
- Stops mold and mildew staining.
- Prevents tannin bleeding and pitch stains.
- May be applied directly to previously painted surfaces.
- Produces a sound base coat.
- Helps prevent heat loss.
|
INTENDED USE:
Commercial and consumer interior use.
SURFACES:
Bare and previously painted surfaces including drywall, paneling, trim, brick, stucco and clean metal.
USES:
Walls, ceilings, doors, trim and millwork.
THINNER:
Water.
APPLICATION:
Spray, brush or roll. |
Interior Vapor-Guard Primer is the right primer to use when you want to protect against interior moisture. Formulated to reduce the movement of moisture through drywall, wood, and masonry. Helps prevent heat loss, mildew, mold, wood rot, and paint failure. Provides excellent adhesion and holdout. Your finish coat will last longer and cover better when using this product. Use to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Color: White. Coverage is approximately 300 square feet per gallon. |
|
|
|
|
TS-500 Drywall And Texture PVA Primer-Gallon
|
Gallon
List: $44.95
Our Price: $35.96
5 Gallon
List: $204.95
Our Price: $163.96
|
Key Features |
Recommendations |
Description |
- Formulated for superior performance.
- Produces a sound base for the application of oil or water based paints.
- Fast drying.
- Recoatable in hours.
- Resists cracking, peeling and chipping.
|
INTENDED USE:
Commercial and consumer interior use.
SURFACES:
Bare unpainted surfaces including drywall, trim, doors, window frames, mouldings, ceilings, cabinets and millwork.
THINNER:
Water.
APPLICATION:
Spray, brush or roll. |
Drywall And Texture PVA Primer (Poly Vinyl Acetate) is a professional primer sealer for new construction and all unpainted interior drywall and texture coatings. A proprietary formula that includes acetate instead of the usual acrylic which is an improvement for sealing out moisture and odors. Designed for the professional painter and for the quality conscious consumer. Formulated for excellent adhesion, even sealing and holdout, it provides a uniform foundation for alkyd or latex paint. Use to establish a sealed uniform surface for the application of flat, satin, semi-gloss or gloss finishes. Color: White. Coverage is approximately 300 square feet per gallon. |
|
|
|
|
TS-664 Etching Primer Phenolic Modified Alkyd Primer-Gallon
|
Gallon
List: $109.95
Our Price: $87.96
5 Gallon
List: $539.95
Our Price: $431.96
|
Key Features |
Recommendations |
Description |
- Use it on most any surface.
- Produces an exceptionally tenacious etching bond.
- Fast drying.
- Recoatable in only two hours.
- Sandable in two hours.
- High build.
- Will fill and seal small cracks and voids.
- Withstands heat to 350F.
|
INTENDED USE:
Commercial or consumer interior / exterior.
SURFACES:
Previously painted surfaces, drywall, plaster, wood, laminated materials, masonry, brick, composite materials and synthetics.
USES:
Walls and trim, siding, paneling, millwork, sash and doors, fences, cabinets, furniture and shelving.
THINNER:
Water.
APPLICATION:
Brush, roll or spray. Two coats required. |
Etching Primer is a phenolic modified alkyd primer coating that produces a sound base coat for hard to adhere to surfaces. Conforms to government specification number TT-P-664 C, D. It is dry enough to be over-coated in just two hours and it sands exceptionally well. Choose it for its speed, ease of application and tenacious bond. Adheres to virtually any surface. Guaranteed to be lacquer proof (won't lift due to hot solvents). One gallon covers up to 300 square feet. See Product Data Sheet for further details. |
|
|
|
|
