|
TS-2 Hard-Shell Urethane-Gallon
|
Quart A&B
List: $65.95
Our Price: $52.76
Half Gallon A&B
List: $99.95
Our Price: $79.96
Gallon A&B
List: $186.95
Our Price: $149.56
|
Key Features |
Recommendations |
Description |
- Government spec product suitable for commercial-industrial or residential use.
- Unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
- Waterproof long term.
- Excellent hardness.
- High adhesion.
- Outstanding UV resistance.
- Colorfast, gloss retentive.
- Withstands heat to 500F.
- Resists cracking, peeling and chipping.
- Self levels.
- 4-6 hour pot life once mixed.
- 20 year guaranty.
|
INTENDED USE: A super-duty urethane finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, wood, plaster fiberglass, synthetic materials and all metals.
USES: Commercial industrial use, hangars, commercial kitchens, bathrooms, showers, parking garages, concrete sealer and garage floor coatings. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-620.
APPLICATION: Brush, roll or spray.
|
Hard-Shell Urethane is a government spec two-component aliphatic polyurethane finish coating that performs according to specification number MIL-P-85285, so you know you are getting the best. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Two coats typically required. |
|
|
|
|
TS-4 Urethane Reinforced Alkyd-1 Gallon
|
Gallon
List: $99.95
Our Price: $79.96
5 Gallon
List: $489.95
Our Price: $391.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial use.
- Good resistance to chemicals dilute acids and alkalis.
- Waterproof finish.
- Good adhesion, hardness and UV resistance.
- Colorfast gloss retentive.
- Withstands high heat, cracking, peeling and chipping.
- Easy to apply.
- Economical to use.
|
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, garage floors and most concrete floor applications. Approved for food service.
PRIMER: Concrete; self-priming in two or more coats. Wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-4 Application Instructions
|
The addition of urethane to our durable industrial alkyd base improves the long term performance of Urethane Reinforced Alkyd. TS-4 is a value, it is economical, versatile and easy to use where standing water, grease, oil or high heat is present. Withstands intense UV in exterior applications. Offers a high level of adhesion with good flexibility, hardness and chemical resistance. Provides good color and gloss retention. Two coats are required. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. |
|
|
|
|
TS-66 Supreme Urethane-Gallon
|
Quart A&B
List: $75.95
Our Price: $60.76
Half Gallon A&B
List: $115.95
Our Price: $92.76
Gallon A&B
List: $215.95
Our Price: $172.76
|
Key Features |
Recommendations |
Description |
- Finish coating for floors. Interior / exterior use.
- Features lower VOC and higher solid content for increased build.
- Provides unequaled resistance to corrosive chemicals, spilled fuel, and battery acid.
- Long-term waterproof.
- Excellent hardness.
- High adhesion.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Withstands heat to 500F.
- Self levels.
- 4-6 hour pot life once mixed.
- 20 year guaranty.
|
INTENDED USE: A super-duty finish coating for industrial, manufacturing and residential interior / exterior applications.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Commercial use, hangars, bathrooms, commercial kitchens, parking garages, drive through areas, concrete sealer and garage floor paint. Approved for food service.
PRIMER: Concrete TS-6390, glazed tile linoleum & fiberglass TS-664, wood, none required.
THINNER: TS-605 Thinner.
APPLICATION: Brush, roll or spray.
TS-66 Concrete Floor Application Instructions |
Supreme Urethane is our most durable product. A super-duty two-component aliphatic acrylic polyurethane finish coating durable enough for the harshest environment and high abuse areas. This recent reformulation of TS-2 Hard-Shell Urethane offers lower VOC, twice the solid content resulting in higher build and increased long-term durability. Offers unequalled performance in a wide variety of categories including adhesion, hardness, chemical resistance, resistance to high heat, flexibity, color and gloss retention. Intended for use where heavy traffic, strong chemicals, high heat, spilled fuel, acids, alkalis, solvents, saltwater, high impacts and corrosion are present. Will not pick up to hot tires. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. |
|
|
|
|
TS-100 Silicone Epoxy - Gallon
|
Quart
List: $49.95
Our Price: $39.95
Half-Gallon
List: $74.95
Our Price: $59.96
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial or residential use.
- Low VOC low odor product.
- Produces a hard yet flexible finish.
- Provides a high level of chemical resistance.
- Waterproof long-term.
- Povides unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Resists cracking, peeling and chipping.
- Self-leveling finish.
- 20 year guaranty.
|
INTENDED USE: Finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, plaster, wood, fiberglass, synthetic materials and all metals.
USES: Showers, kitchens, bathrooms, laundry rooms, basements, epoxy garage floors and most concrete floor paint applications. Approved for food service.
PRIMER: Concrete; self priming in to or moe coats. wood, linoleum & fiberglass TS-664 Etching Primer.
THINNER: TS-101 Thinner.
APPLICATION: Brush, roll or spray.
TS-100 Concrete Floor Application Instructions
|
Silicone Epoxy is a unique resin blend that produces extraordinary results in a wide variety of applications. Silicone combined with epoxy produces a finish that is both hard and flexible at the same time. The self leveling finish is remarkably glossy and smooth. Offers unequalled performance where standing water, grease, oil or intense UV are regularly present. Offers a high level of adhesion with good flexibility, hardness, chemical resistance and resistance to high heat. Offers remarkable color and gloss retention. Grinding or blasting not typically required on concrete with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 400 square feet per gallon. Apply two or more coats for best results. Note: Product formerly named 1-Part Epoxy. |
|
|
|
|
TS-200 Mono-Epoxy-Gallon
|
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Easy to use no mix formula.
- Commercial industrial quality product.
- Will not lift to hot tires.
- Long term waterproof finish.
- Good chemical resistance.
- Self-priming on concrete and porous tile in two or more coats.
- Resists fading and weathering.
- Resists cracking, peeling and chipping.
- Self levels.
- Low odor.
- Nontoxic finish.
- 20 year guaranty.
|
INTENDED USE: Commercial, industrial, manufacturing and residential interior / exterior. Epoxy floor paint.
SURFACES: Concrete, tile, masonry, fiberglass and metal.
USES: Commercial use, garage floors, basements, retail spaces, kitchens, laundry rooms, patios, porches, docks, ramps, walkways. Meets most concrete floor coatings requirements.
THINNER: TS-101 Leveling Thinner.
APPLICATION: Brush, roll or spray.
TS-200 Application Instructions
|
Mono-Epoxy rewrites the book on epoxy itself. A new generation alkyd epoxy-ester resin blend that eliminates the need for mixing multiple components making it easier to use. It can be used in hot and cold climates (-40F – 350F). Has a 10 year guaranty in swimming pools (see it at www.ligeguardpaint.com), which is a testimony to its durability. Its exceptionally high level of performance and ease of application combine to make it a compelling choice. Self-priming on porous materials, use recommended primer on non-porous materials. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. A minium of two coats is required. |
|
|
|
|
TS-905 Aquapoxy Epoxy-Gallon
|
Gallon A&B
List: $219.95
Our Price: $175.96
4 Gallon A&B
List: $869.95
Our Price: $695.96
|
Key Features |
Recommendations |
Description |
- Use as a one-coat or two-coat system.
- Eco-friendly Zero VOC odorless product.
- Long pot life makes it easy to use.
- Surface tolerant breathable formula.
- Provides remarkable resistance to corrosive chemicals.
- High adhesion.
- Excellent hardness.
- Good colorfastness and gloss retention.
- Self-leveling finish.
- 20 year guaranty.
|
INTENDED USE: A super-duty concrete coating for floors. Primarily for interior use but may be used outdoors.
SURFACES: Concrete, tile, VCT, masonry, plaster, fiberglass, synthetic materials.
USES: Commercial industrial use, hangars, commercial kitchens, retail, bathrooms, parking garages, concrete sealer and garage floor coatings. Approved for food service.
PRIMER: None required on concrete and tile. Glazed tile, linoleum & fiberglass use TS-664.
THINNER: Water.
APPLICATION: Roll or spray.
NOT RECOMMENDED: For wooden surfaces.
TS-905 Application Instructions
|
Aquapoxy is a new generation catalyst-cured epoxy floor finish that produces excellent results without harming you or the environment. And it’s tough! Recently chosen by 7-11 Stores (world’s largest retail chain) for use in all new construction. Utilizes breathable resin technology to produce an exceptionally hard, durable, surface tolerant finish. Adhesion, chemical resistance, hardness and long term durability are all impressive! This unique combination of environmental and performance properties make it a favorite with architects and property managers. Acceptable for use where heavy traffic, corrosive chemicals, impacts and abrasions are present. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers 200-250 square feet per gallon. Apply one or two coats as desired. Two coats recommended in H-D and commercial applications. |
|
|
|
|
TS-920 Aquapoxy II -Gallon
|
Gallon
List: $149.95
Our Price: $119.96
5 Gallon
List: $739.95
Our Price: $591.96
|
Key Features |
Recommendations |
Description |
- Use as one-coat or two-coat system.
- Utalizes nano-technology to produce superior adhesion.
- Eco-friendly, low VOC, low odor product.
- No-mix formula makes it easy to use.
- Surface tolerant breathable finish.
- Provides good chemical resistance.
- Self-priming.
- Excellent hardness & durability.
- Good colorfastness and gloss retention.
- Self-leveling finish.
- 20 year guaranty.
|
INTENDED USE: A commercial grade finish coating for floors. Interior / exterior use.
SURFACES: Concrete, porous tile, masonry, plaster and synthetic materials.
USES: Commercial, industrial, retail, hangars, commercial kitchens, bathrooms, parking garages, concrete sealer and garage floor coatings. Approved for food service.
PRIMER: Self priming on concrete, masonry and porous tile. Glazed tile, wood & fiberglass TS-664 Etching Primer.
THINNER: Water.
APPLICATION: Brush, roll or spray.
TS-920 Application Instructions
|
Aquapoxy II is our most technically advanced product. Unique because it includes A resin and B catalyst combined in one container, effectively making it a two-component product in one can. Once applied the molecules cross-link greatly increasing hardness and durability. Utilizes nano-technology producing superior adhesion (micro-ground particles penetrate concrete producing a permanent bond) providing results not commonly associated with water based epoxy finishes. It is low VOC, nontoxic and environmentally friendly. Acceptable for use where there is motorized traffic, chemicals, salt, high impacts and abrasions. It will not lift to hot tires. The finish is breathable making it surface tolerant and easy to apply. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or muriatic acid. Self priming, may be applied direct to concrete or over any existing coating. 1-COAT COVERAGE: use a ¾ roller cover @ 200 sq ft per gal. 2-COAT COVERAGE: use a 3/8” roller cover @ 300 sq ft per gal. Color is satin, clear is gloss. Apply one coat of color/one coat of clear for a gloss finish. |
|
|
|
|
TS-4985 Ever-Last EXP-Gallon
|
Gallon
List: $149.95
Our Price: $119.96
5 Gallon
List: $739.95
Our Price: $591.96
|
Key Features |
Recommendations |
Description |
- Suitable for commercial-industrial, food service or residential use.
- Allows you to produce a floor in less than one day.
- Adheres to virtually any surface.
- Produces an exceptionally tenacious etching bond.
- dry enough to over coat in just 2 hours.
- System is waterproof long-term.
- Excellent hardness & durability.
- Good UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- 20 year guaranty.
|
INTENDED USE: A fast-dry self-priming base-coat for floors. Clear top coating required. Recommend TS-2, TS-66, TS-200 or TS-920 Clear. Interior / exterior use.
SURFACES: Concrete, glazed tile, VCT tile, linoleum, masonry and wood.
USES: Commercial kitchens, retail spaces, bathrooms and laundry rooms. Approved for food service and industrial floor coatings applications.
THINNER: TS-605 Thinner.
APPLICATION: Most applications are by roller coat but it is sprayable.
TS-4985 Application Instructions
|
Ever-Last EXP Fast-Dry Floor Coating is a phenolic modified alkyd that is self-priming and dries lightning fast. Choose it for its speed, ease of application and long term durability. An excellent choice when shut down time is limited. Adheres to virtually any surface including VCT tile. Well liked in food service areas, kitchens, bathrooms, restaurants or wherever application time is limited. Clear coat required (recommend TS-66 Supreme Urethane). Chips and clear coat are required because EXP dries so quickly it doesn’t have the opportunity to level. EXP is recoatable in only 2 hours. See Product Data Sheet for further details. |
|
|
|
|
TS-6433 Ever-Last Polyamide Epoxy-Gallon
|
1 Gallon A&B
List: $209.95
Our Price: $167.96
2 Gallon
List: $405.95
Our Price: $324.76
|
Key Features |
Recommendations |
Description |
- A government spec formula suitable for commercial-industrial or residential use.
- Excellent resistance to corrosive chemicals, spilled fuel, and battery acid.
- Waterproof finish.
- High adhesion.
- Excellent hardness.
- Produces an exceptionally durable finish.
- 4-6 hour pot life once mixed.
- 20 year guaranty.
|
INTENDED USE: A heavy-duty epoxy finish coating for floors. Interior / exterior use.
SURFACES: Concrete, tile, masonry, fiberglass, wood and metal.
USES: Concrete floors, walkways, ramps, commercial kitchens, manufacturing areas, industrial areas, bathrooms and laundry rooms. Excellent for use as an epoxy garage floor coating product. Approved for food service.
PRIMER: Concrete & wood TS-6390, tile linoleum & fiberglass TS-664.
THINNER: TS-605 Thinner.
APPLICATION: Apply by roller-coat or spray.
TS-6433 Floor Application Instructions
|
Ever-Last Epoxy is a two component polyamide epoxy floor coating intended for heavy-duty commercial and industrial applications. A government spec formula that performs according to specification number MIL-C-22750. Use Ever-Last Epoxy wherever there is high volume motorized traffic, corrosive chemicals, spilled fuel, oil or in extreme weather conditions. Offers excellent performance in a wide variety of categories including adhesion, hardness and chemical resistance. It provides a high level of performance where acids, alkalis, high impacts and abrasions are regularly present. Will not pick up to hot tires, approved for food service applications. Grinding or blasting not typically required with the use of TS-695 Etching Cleaner or Muriatic acid. Covers up to 300 square feet per gallon. Best when two coats are applied. |
|
|
|
|
Only Top Secret makes government spec industrial floor coatings available to the public! Our products offer an exceptionally high level of performance combined with remarkable value. We have a wide variety of products including high solids Urethane, Epoxy, Acrylic, Alkyd and Epoxy concrete coatings to choose from. All are easy to apply and guaranteed for 20 years when properly applied. We offer outstanding technical advice and customer service so if you have a question don't hesitate to call us toll free at 1-877-568-2168 M-F 8AM-5PM Pacific Time.
