Aerospace Coatings & Aircraft Paint
- Category: Aerospace Coatings & Aircraft Paint
|
|
|
|
|
|
|
|
TS-2 Hard-Shell Urethane-Gallon
|
Quart A&B
List: $65.95
Our Price: $52.76
Half Gallon A&B
List: $99.95
Our Price: $79.96
Gallon A&B
List: $186.95
Our Price: $149.56
|
Key Features |
Recommendations |
Description |
- Boeing spec formula.
- Out performs AcryGlo for less cost.
- Suitable for use as a topcoat on commercial aircraft, single engine aircraft and helicopters.
- Acceptable for brush and roll applications.
- Available in federal 595 colors 1908 to present. Resistant to Skydrol® fluid.
- Outstanding UV resistance.
- Colorfast gloss retentive.
- Self levels. 4-6 hour pot life once mixed.
|
INTENDED USE:
Government, commercial, private aircraft and helicopters.
SURFACES:
Ferrous and nonferrous metals, wood, fiberglass, plastic, gel-coat and synthetic materials.
USES:
An overall topcoat or for stripes and accent colors. Acceptable for interior and exterior surfaces.
THINNER:
TS-620 Blended Thinner.
APPLICATION:
Brush, roll or spray.
|
Hard-Shell Urethane is a high-performance government spec two-component polyurethane aerospace coating that performs according to federal specification number MIL-P-85285. A proven performance coating in the aviation industry for over 25 years, it is suitable for a wide variety of interior and exterior applications. Commonly used as an overall topcoat and for stripes and accent colors. It is quick drying, exhibits outstanding gloss, and long-term gloss retention. Performs exceptionally well in a variety of performance categories including adhesion, hardness, chemical resistance, resistance to high heat, intense UV, salt air, spilled fuel and Skydrol® fluid. Works well with a wide variety of additives. Currently available in stock and special order non-metallic colors and bases. Metallic OEM color matching services not available at this time. |
|
|
|
|
TS-4 Urethane Reinforced Alkyd-Gallon
|
Quart
List: $35.95
Our Price: $28.76
Gallon
List: $99.95
Our Price: $79.96
5 Gallon
List: $489.95
Our Price: $391.96
|
Key Features |
Recommendations |
Description |
- Good resistance to corrosive chemicals, spilled fuel, and hydraulic fluid.
- Good adhesion, hardness and UV resistance.
- Colorfast gloss retentive.
- Withstands high heat, cracking, peeling and chipping.
- Available in federal 595 colors 1908 to present .
|
INTENDED USE:
Private aircraft and helicopters.
SURFACES:
Ferrous and nonferrous metals, wood, fiberglass, plastic, gel-coat and synthetic materials.
USES:
An overall topcoat or for stripes and accent colors. Acceptable for interior and exterior surfaces.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
|
Urethane Reinforced Alkyd is a durable alkyd enamel finish coating for aerospace applications fortified with urethane to enhance long term performance. This versatile, easy to use product levels nicely making it a good choice where spray restrictions are in place. It is acceptable for use where harsh weather grease, oil or high heat is present. It withstands intense UV in exterior applications, it cleans easily and resists staining agents and chemicals. It has good flexibility combined with good hardness. Provides good color and gloss retention. Covers up to 300 square feet per gallon. |
|
|
|
|
TS-66 Supreme Acrylic Urethane-Gallon
|
Quart A&B
List: $75.95
Our Price: $60.76
Half Gallon A&B
List: $115.95
Our Price: $92.76
Gallon A&B
List: $215.95
Our Price: $172.76
|
Key Features |
Recommendations |
Description |
- Recently updated Boeing spec formula.
- Out performs AcryGlo High Solids for less money.
- Recent reformulation is lower VOC with higher solid content for increased build.
- Provides unequaled resistance to corrosive chemicals, fuel and Skydrol® fluid.
- Available in federal 595 colors 1908 to present.
- Outstanding UV resistance, colorfast gloss retentive.
- Withstands heat to 500F.
- Levels nicely.
|
INTENDED USE:
Government, commercial, private aircraft and helicopters.
SURFACES:
Ferrous and nonferrous metals, wood, fiberglass, plastic, gel-coat and synthetic materials.
USES:
An overall topcoat or for stripes and accent colors. Acceptable for interior and exterior surfaces.
THINNER:
TTS-605 Synthetic Thinner.
APPLICATION:
Brush, roll or spray.
|
Supreme Acrylic Urethane is a new generation two-component aliphatic polyurethane finish coating for aircraft that out performs industry leaders for less money. A MIL SPEC formula that performs according to federal specification number MIL-P-85285. The high solid content formula is fast drying. It produces an exceptionally durable finish with excellent long-term gloss, depth and clarity. Commonly used as an overall topcoat and for stripes and accent colors. Offers unequalled performance in a wide variety of performance categories including adhesion, hardness, chemical resistance, resistance to high heat, intense UV, salt air, spilled fuel and Skydrol® fluid. Moreover, it is long term submersible and withstands heat to 500F. All these factors combine to make it a compelling choice. Works well with a wide variety of additives. Currently available in stock and special order non-metallic colors and bases. Metallic OEM color matching services not available at this time. |
|
|
|
|
TS-100 Silicone Epoxy - Gallon
|
Quart
List: $49.95
Our Price: $39.96
Half-Gallon
List: $74.95
Our Price: $59.96
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Brush roll or spray application.
- Self-levels like no other paint.
- VOC compliant low odor product.
- Produces a hard yet flexible finish light weight finish.
- No-mix formula.
- Unequaled UV resistance, colorfastness and gloss retention.
- Withstands heat to 400F.
- Available in federal 595 colors 1908 to present.
|
INTENDED USE:
Government, commercial, private aircraft and helicopters.
SURFACES:
Ferrous and nonferrous metals, wood, fiberglass, plastic, gel-coat, fabrics and synthetic materials.
USES:
An overall topcoat or for stripes and accent colors. Acceptable for interior and exterior surfaces.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
TS-100 Application Instructions
|
Silicone Epoxy is our signature product. A unique resin blend that produces extraordinary results in a wide variety of applications. Silicone-alkyd combined with epoxy-ester produces a light weight high performance finish that is both hard and flexible at the same time. Offers unequalled performance where constant moisture, grease, oil or intense UV are regularly present. Produces exceptionally good leveling properties when brushed or rolled making it a compelling choice where spray restrictions are in place. Offers a high level of adhesion, hardness, chemical resistance, resistance to high heat. Acceptable for use on fabrics. Outstanding color and gloss retention. Covers up to 400 square feet per gallon. Available in colors and clear. |
|
|
|
|
TS-103 Ready-Mixed Aluminum-Gallon
|
Quart
List: $47.95
Our Price: $38.36
Gallon
List: $136.95
Our Price: $109.56
5 Gallon
List: $674.95
Our Price: $539.96
|
Key Features |
Recommendations |
Description |
- Hard to find Government spec formula.
- Colored entirely by micro-ground aluminum particles.
- Withstands heat to 400F.
- Repairs rusted or deteriorated metal.
- Colorfast gloss retentive.
- Resists cracking, peeling and chipping.
|
INTENDED USE:
Government, commercial and private aircraft.
SURFACES:
Ferrous and nonferrous metals, wood, fiberglass, plastic, gel-coat and synthetic materials.
USES:
An overall topcoat for aircraft and helicopters. It is also used for stripes and accent colors, interior and exterior surfaces.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
|
Ready-Mixed Aluminum is a tough alkyd enamel aerospace paint entirely pigmented by micro-ground aluminum particles. Meets government specification number TT-P-38-D. A fast drying, easy-to-apply paint specially formulated to withstand high temperatures without discoloring or breaking down. Its aluminum pigmentation provides a high level of corrosion control. A permanent, heat shield is created with the addition of aluminum to the alkyd base. Excellent for repairing rusted or deteriorated metals. Finish is a semi-gloss aluminum flake in appearance. Withstands dry temperatures up to 400 degrees F. |
|
|
|
|
TS-527 Camo-Coat-Gallon
|
Quart
List: $38.95
Our Price: $31.16
Gallon
List: $105.95
Our Price:84.76
|
Key Features |
Recommendations |
Description |
- Exact lusterless drab paint used in military applications.
- Correct product for use on vintage war birds, vehicles and equipment.
- Available in federal 595 colors 1908 to present.
- High resistance to saltwater, corrosive chemicals, spilled fuel, grease and oil.
- Withstands heat to 350F.
- Resists cracking, peeling and chipping.
|
INTENDED USE:
Government, commercial or private aircraft. Suitable for use above and below the waterline on amphibious aircraft.
SURFACES:
Wood, fiberglass, metal and synthetic materials.
USES:
Aircraft camouflage paint, fiberglass paint, aluminum paint, corrosion control. Use on guns, vehicles and equipment. Add Pro-Tex (SM-630) for non-skid use.
THINNER:
TS-101 Leveling Thinner.
APPLICATION:
Brush, roll or spray.
|
Camo-Coat is a government spec lusterless coating that performs according to specification number TT-E-527. Provides you with the exact non-reflective "drab" appearance and colors you want in a tough military specification aerospace paint.˙It?s the same product you expect to see on WW II vintage aircraft, vehicles, and equipment.˙The fully cured finish can withstand repeated washing and normal everyday abuse. Withstands impacts, abrasions, wet environments, water submersion, salt spray and resists rust. Available in federal 595 colors 1908 to present. Covers up to 300 square feet per gallon. |
|
|
|
|
TS-6433 Ever-Last Epoxy-Gallon
|
1 Gallon A&B
List: $209.95
Our Price: $167.96
2 Gallon
List: $405.95
Our Price: $324.76
|
Key Features |
Recommendations |
Description |
- Government spec formula.
- Suitable for use in many applications.
- Excellent resistance to corrosive chemicals, fuel, and hydraulic fluid.
- Long term submersible.
- Available in federal 595 colors 1908 to present.
- Produces an exceptionally durable finish.
- 4-6 hour pot life once mixed.
|
INTENDED USE:
Government, commercial, private aircraft and helicopters.
SURFACES:
Ferrous and nonferrous metals, wood, fiberglass, plastic, gel-coat and synthetic materials.
USES:
A topcoat for use in interior and exterior applications.
THINNER:
TS-605 Synthetic Thinner.
APPLICATION:
Brush, roll or spray.
TS-6433 Floor Application Instructions
|
Ever-Last Epoxy is a two component polyamide epoxy finish coating that excels in heavy-duty applications. A government spec formula that performs according to specification number MIL-C-22750. Choose it for use wherever corrosive chemicals, spilled fuel, oil or hydraulic fluid is present. Offers excellent performance in a wide variety of categories including adhesion, hardness, water resistance, chemical resistance, and resistance to high impacts and abrasions. Covers up to 300 square feet per gallon. Available in colors and clear. |
|
|
|
|
TS-2032 Aero-Lac-Gallon
|
Gallon
List: $104.95
Our Price: $83.96
5 Gallon
List: $514.95
Our Price: $411.96
|
Key Features |
Recommendations |
Description |
- Government spec formula.
- Nitrocellulose added for quick drying and ease of use.
- Available in federal 595 colors 1908 to present.
- Resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils.
- Highly durable finish.
|
INTENDED USE:
Government, commercial and private aircraft and helicopters.
SURFACES:
Ferrous and nonferrous metals and wood.
USES:
A light weight fast drying topcoat for interior use.
THINNER:
Lacquer Thinner.
APPLICATION:
Brush, roll or spray.
|
Aero-Lac is a premium grade nitrocellulose lacquer that meets specification numbers TT-L-20 and TT-L-32 so you know you are getting the best! Favored for its beauty, light weight and ease of application. Nitrocellulose has been added for quick drying and ease of use. It has excellent depth, luster, durability and a wide variety of application possibilities. A highly versatile product that provides beauty, durability and long lasting protection. Our formula is resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils. Not intended for use over bare metal. Apply over properly prepared and primed surfaces. Available in colors and clear. |
|
|
|
