Ever-Last Epoxy is a two component, high performance catalyst-cured epoxy paint. It provides excellent chemical resistance and hardness to auto and truck parts, undercarriages and under hood parts. It provides unequaled adhesion, hardness, chemical resistance and is fully submersible making it a favorite in 4x4 paint, off road vehicle paint and automotive paint applications. Use it wherever salt air and abusive weather conditions requires a hard, highly durable rust preventative protective coating. Provides outstanding service in virtually all interior or exterior applications. Intended for use on metal, wood, fiberglass, aluminum and composite materials. Excellent for refinishing undercarriages, frames, parts, tanks, bumpers and fender wells. Ever-Last Epoxy provides exceptional performance and durability in the harshest chemical environments. Ever-Last Epoxy can be self priming depending on type of substrate and application, however, a primer coat is typically necessary. Apply using brush, roller or spray (conventional, airless or electrostatic).

Stats: Covers 400-450 square feet per gallon on porous surfaces, up to 500 square feet on non porous surfaces. Available in gloss, semi-gloss and eggshell finishes. Dry to the touch in one hour, tack free in 8 hours, recoat in 24 hours. Pot life is 8 hours @ 70 degrees F. Available in 200 non metallic paint colors. Custom colors are available on request. Available in 1 gallon, two gallon and 5 gallon kits.

Recommended preparation: For best results remove old vehicle paint, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or automotive primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch bare aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any automotive coating system.

Recommended primers: Wood-TS-664 Etching Primer. Fiberglass, aluminum, steel and composite materials-TS-664 Etching Primer, TS-5672 Plastic Primer or TS-6390 Ever-Last Epoxy Primer.

Paint solvent & clean up: Thinning not typically required. Use only with factory recommended thinner, TS-605 Thinner. Clean all equipment thoroughly with TS-605 Thinner. Clean up with TS-605 Thinner or TS-610 Lacquer Thinner.

Acceptable for use as an automotive finish, paint for trucks, auto paint, non metallic paint, automotive colors, body paint, car and truck paint, enamel paints, old vehicle paint, old car paint, truck paint, 4x4 paint, off road vehicle paint, urethane coating. Use with basecoat primer, automotive primer, acrylic coatings, automotive clear coating, body paint, clear automotive coating, lacquer resisting primer, non metallic paint, polyurethane coatings, urethane clear, urethane coating, auto paints, automotive finishes, non metallic paint for trucks, aliphatic urethane.