Now you can refinish your car, truck or off road vehicle with the very same high performance coating the U.S. Air Force, U.S. Navy and U.S. Army uses on its high performance vehicles, aircraft and equipment. That’s right guys; we’re talking about putting fighter plane paint on your vehicle! Think about it; have you ever seen chalking, cracking, peeling, scuffed or faded paint on an airliner? Not likely. Light weight high performance aircraft coatings must withstand all conceivable forms of punishment and yet they come up shinning. How do they do that? The military and government uses a linear aliphatic urethane which is exceptionally durable, flexible, impact resistant and abrasion resistant. It withstands supersonic impacts, extremes in temperature, acids, corrosive chemicals and spilled aviation fuel. Only Top Secret makes this kind of modern automotive coatings technology available to the public! When Hard-Shell Urethane is used as an automotive coating or off road vehicle paint you are guaranteed unrivaled performance and durability. Hard-Shell Urethane out performs typical car paint or 4x4 paint in every performance category for less money making it a no-brainer in our opinion. If you want the toughest, most durable automotive paint available today look not further because this is it! TS-2 Hard-Shell Urethane is a government spec coating system that meets specification number MIL-PRF-85285 so you know you are getting the best! A two-component aliphatic urethane designed for extra durability and resistance to strong chemicals, heat, spilled fuel, acids, alkalis, solvents, salt spray and corrosion over a variety of substrates. Acceptable for use on almost any surface. When used as a rust preventative coating system it provides exceptional performance and durability. Recommended for use on ferrous metals, prepared steel, aluminum, fiberglass and wood. Resists high heat (350F), chemicals, fuels and staining agents.

Stats: Covers 400-450 square feet per gallon depending on surface and specific application requirements. Dry to the touch in 30 minutes-1 hour. Mixing Ratio: 7:1 (by volume) with Part B (Induction Time: 15 minutes) Pot life: 4 hours * It is supplied at spray viscosity suitable for most conventional systems. Compatible for electrostatic spray. Low temperature curing (as low as 20 F.) Available in 200 non metallic paint colors. Available in flat, satin, semi gloss and gloss. Custom colors available on request for an additional $10.00 per container.

Recommended preparation: For best results remove old vehicle paint, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or automotive primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch bare aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any automotive coating system.

Recommended primers: Wood-TS-664 Etching Primer. Fiberglass, aluminum, steel and composite materials-TS-664 Etching Primer, TS-5672 Plastic Primer or TS-6390 Ever-Last Epoxy Primer.

Paint solvent & clean up: Use only with factory recommended thinner, TS-620 Thinner Reducer. Clean all equipment thoroughly with TS-620 Thinner Reducer or TS-610 Lacquer Thinner.

Acceptable for use as an automotive finish, paint for trucks, auto paint, non metallic paint, automotive colors, body paint, car and truck paint, enamel paints, old vehicle paint, old car paint, truck paint, 4x4 paint, off road vehicle paint, urethane coating. Use with basecoat primer, automotive primer, acrylic coatings, automotive clear coating, body paint, clear automotive coating, lacquer resisting primer, non metallic paint, polyurethane coatings, urethane clear, urethane coating, auto paints, automotive finishes, non metallic paint for trucks, aliphatic urethane.