|
The
secret is out on TS-100 1 Part Epoxy. This easy to use automotive
finish replaces hard to use multiple component epoxy and urethanes
in a wide variety of vehicle paint applications. Its’ a one of a
kind, super-premium automotive coating that is excellent for use on
cars, trucks, motorcycles and machinery. A single component Direct
To Metal coating (DTM) that is durable, easy to use and
environmentally friendly. 1 Part Epoxy won’t chalk, fade or yellow
like two component epoxy and far more scuff resistant than typical
car paint or enamel coatings. Now you can use this exclusive product
in direct to metal paint applications safely and economically
without the need* for primer in many instances. 1 Part Epoxy is a
automotive finish that produces a film that remains both hard and
flexible at the same time. Its silicone epoxy base allows high
flexibility, heat resistance and UV stability while providing the
excellent hardness, scuff resistance and chemical resistance you
expect when you typically think of an epoxy or urethane. Since its
oxygen cured rather than catalyzed it holds its color and gloss
longer, is easier to work with and less hazardous. 1 Part Epoxy
adheres to almost anything and it self levels like a dream. Best
when sprayed but brush it on and watch the brush marks disappear
before your very eyes! Industry veterans recognize this product as
being something very special. A rust inhibiting car paint that
offers excellent resistance to chemicals, spilled fuel, brake fluid
and acids. It is impact resistant to 500 PSI, heat resistant to 350+
degrees, color-fast, non-chalking and resists cracking, chipping and
peeling. Additionally, it covers up to three times the area of
typical car paint because its maximum dry film thickness is only two
mils. That’s half the thickness of a sheet of paper! If that were
not enough, it typically covers in just one or two coats and there
is no need of a clear coat! When used under the hood as a heat
resistant coating it provides exceptional performance and
durability. 1 Part Epoxy provides unequaled adhesion to Steel, Iron,
Wood, Composites, Ceramics, Vinyl, Aluminum and Fiberglass surfaces.
It is easy to use because it can be brushed, rolled or sprayed and
it cleans up easily.
Stats: Covers 400-450 square feet per gallon on porous surfaces, up
to 800 square feet on non porous surfaces when sprayed. Dry to the
touch in 2-4 hours. Pot life: Not applicable * Very high in solid
content so it will require reduction in most applications.
Compatible for electrostatic spray. Low temperature curing (as low
as 20 F.) Available in 200 stock non metallic paint colors.
Available in low sheen, semi-gloss and gloss. Custom car paint
colors available on request for an additional $10.00 per container.
Recommended preparation: For best results remove old vehicle paint,
loose scale, grease, oil and contaminates. Sand, grind, blast or
power-wash prior to the application of any cleaner or automotive
primer. Steel: TS-5679 Phos-Pro Rust
Converting Cleaner, etch bare aluminum with
TS-695 Etching Cleaner. All surfaces must be thoroughly dry
before the application of any automotive coating system.
Recommended primers: Wood-TS-664 Etching
Primer. Fiberglass, aluminum, steel and composite
materials-TS-664 Etching Primer, TS-5672
Plastic Primer or TS-6390 Ever-Last
Epoxy Primer.
Paint solvent & clean up: Use only with factory
recommended thinner, TS-101 Thinner. Clean all equipment
thoroughly with TS-101 Thinner or TS-602
Mineral Spirits.
Accelerate/Harden: See TS-160
Accelerator/Hardener on SUPPLIES
Page.
Acceptable for use as an automotive finish, paint for trucks, auto
paint, non metallic paint, automotive colors, body paint, car and
truck paint, enamel paints, old vehicle paint, old car paint, truck
paint, 4x4 paint, off road vehicle paint, urethane coating. Use with
basecoat primer, automotive primer, acrylic coatings, automotive
clear coating, body paint, clear automotive coating, lacquer
resisting primer, non metallic paint, polyurethane coatings,
urethane clear, urethane coating, auto paints, automotive finishes,
non metallic paint for trucks, aliphatic urethane.
Application Instructions
|
