|
The
revolution continues with 1 Part Epoxy-Clear! A clear version of our
break through 1 Part Epoxy that may be applied on wood, ceramics,
fiberglass or most metals. 1 Part Epoxy Clear utilizes the exclusive
hybrid resin blend technology that Top Secret Coatings is best known
for. Please note that 1 Part Epoxy Clear has not been formulated for
use as a white-clear topcoat. Rather it is intended for use in
automotive clear coat applications, such as on wood or metals where
a slight ambering is acceptable. What makes it unlike a typical
automotive clear coating is that it produces a film that remains
both hard and flexible at the same time. Its silicone epoxy
base allows high flexibility, heat resistance and UV stability while
providing the excellent hardness, scuff resistance and resistance to
salt and chemicals you expect from Top Secret. 1 Part Epoxy Clear
automotive coating won’t crack, peel, chalk or yellow like typical
epoxy and has better UV resistance than lacquer or acrylic coatings.
The single component oxygen cure allows it to hold its gloss longer,
makes it easier to work with and less hazardous. 1 Part Epoxy Clear
automotive coating adheres to almost anything and self levels like a
dream. Brush it on and watch the brush marks disappear before your
very eyes! Industry veterans recognize this product as being
something very special. It offers excellent resistance to chemicals,
spilled fuel, hydraulic fluid and acids. It is impact resistant to
500 PSI and is heat resistant to 350+ degrees. It is gloss
retentive, non-chalking and resists cracking, chipping and peeling.
Additionally, it covers up to three times the area of typical
performance coating because its maximum dry film thickness is only
two mils. That’s half the thickness of a sheet of paper! What more
could you ask of any automotive clear coating? 1 Part Epoxy Clear
provides outstanding adhesion to Steel, Iron, Wood, Composites,
Ceramics, Copper, even Aluminum! It is easy to use because it can be
brushed, rolled or sprayed and it cleans up easily. This lead-free
formula is low is non-toxic when dry so it is safe to use.
Stats: Covers 400-450 square feet per gallon on porous surfaces, up
to 800 square feet on non porous surfaces when sprayed. Dry to the
touch in 2-4 hours. Pot life: Not applicable * Very high in solid
content so it will require reduction in most applications.
Compatible for electrostatic spray. Low temperature curing (as low
as 20 F.) Available in high gloss sheen.
Recommended preparation: For best results remove old vehicle paint,
loose scale, grease, oil and contaminates. Sand, grind, blast or
power-wash prior to the application of any cleaner or automotive
primer. Steel: TS-5679 Phos-Pro Rust
Converting Cleaner, etch bare aluminum with
TS-695 Etching Cleaner. All surfaces must be thoroughly dry
before the application of any automotive coating system.
Paint solvent & clean up: Use only with factory recommended thinner,
TS-101 Thinner. Clean all equipment
thoroughly with TS-101 Thinner or TS-602
Mineral Spirits.
Accelerate/Harden: See TS-160
Accelerator/Hardener on SUPPLIES
Page.
Use
as: automotive clear coat, car paint, urethane clear, automotive
clear coating, automotive clear coatings, auto coating, automotive
finish, automotive finishes, car finish. Acceptable for use with
most basecoat primer, aliphatic urethane truck paints, auto paints,
automotive finishes, automotive primer, automotive paint, body
paint, car finish, car paints, car paint colors, car and truck
paint, clear automotive coating, lacquer resisting primer, old
vehicle paint, old car paint, metallic paint, metal paint, non
metallic paint, non metallic paint for trucks, non metallic paint
colors, vehicle paint, 4x4 paint, off road vehicle paint.
Application Instructions
|
