Now you can really heat things up with TS-105 Boiler Coat! It’s a silicone based high heat automotive paint that is heat resistant to 1200 degrees Fahrenheit! A direct to metal (DTM) silicone based rust preventative coating that is for use on any exterior or interior surface that is subject to intense heat. A heat resistant, ready mixed, silicone based high heat car paint that is a direct to metal coating. Rust prevention, durability, performance and protection are outstanding with Boiler-Coat. A heat resistant silicone resin vehicle based coating specifically developed to meet today’s demand for superior heat resistance. Ideal for use as a rust preventative paint or heat treatment to a wide variety of substrates including engine compartments, engine blocks, exhaust manifolds, radiators, tanks, exhaust stacks, grills and other areas where a heat resistant highly durable protective finish is desired. A fast-drying, easy-to-apply high heat automotive paint specially formulated to withstand high temperatures without loosing its luster, discoloring or breaking down. A government spec performance formula that complies with specification number TT-P 28G so you know you are getting the best! Acceptable for use as an Engine Enamel or High Heat Paint for maximum heat dissipation and rust prevention. Dries to a matte finish.

Stats: Covers 300-400 square feet per gallon. Dry to the touch in 1-2 hours. Pot life: Not applicable * Very high in solid content so it will require reduction in most applications. Low temperature curing (as low as 20 F.) Available in black or aluminum colors. Available in gallon and five gallon containers.

Recommended preparation: For best results remove old vehicle paint, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or automotive primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch bare aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any automotive coating system.

Recommended primers: None.

Paint solvent & clean up: Use only with factory recommended thinner, TS-101 Thinner. Clean all equipment thoroughly with TS-101 Thinner or TS-602 Mineral Spirits.

Acceptable for use as an automotive finish for parts, paint for trucks, auto paint, metallic paint, automotive colors, car and truck paint, old vehicle paint, 4x4 paint, off road vehicle paint. Use with basecoat primer, automotive primer, acrylic coatings, automotive clear coating, clear automotive coating, lacquer resisting primer, polyurethane coatings, urethane clear, urethane coating, acrylic coatings, automotive clear coatings, automotive finishes, clear protective coating.