A high quality two-component multi-purpose fast-drying epoxy polyamide primer formulated to provide outstanding adhesion, extra durability and resistance to strong chemicals, spilled fuel, acids, alkalis, solvents, salt spray and corrosion over most high performance aircraft coating systems. It has the highest ranking possible for adhesion and durability over a variety of substrates. Formulated to out perform one-part aircraft primer. Use in high traffic, high abuse, applications or in harsh environments. A premium-grade, high solid rust stopping primer that not only acts as an effective rust preventative on steel but should be viewed as an integral component of any rust preventative coating system. This product is the recommended primer-undercoat for use with TS-6433 Ever-Last Epoxy and TS-2 Hard-Shell Two Part Urethane in most applications. Also recommended for use on ferrous metals, prepared steel, aluminum and wood. Suitable for use on all interior and exterior surfaces. Apply by brush, roller or airless sprayer. Dry to the touch in 30 minutes. Pot life 24 hours @ 70F. Available in one gallon and two gallon kits.

Stats: Dries to the touch in 30 minutes, tack free in 1 hour, recoatable in 4 hours, dries hard in 8 hours. Apply by brush, roller or spray. Coverage is approximately 250-300 square feet per gallon @ 2 mils dry film thickness.

Recommended preparation: For best results remove old aircraft primer, aircraft paint, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner. All surfaces must be thoroughly dry before the application of any aircraft primer or aircraft coating systems. Recommend the use of TS-117 Wash Primer in all aluminum aircraft paint applications. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch fiberglass and aluminum with TS-695 Etching Cleaner.

Application: The primer should be allowed to dry a minimum of two to three hours before recoating with subsequent primers or topcoats. It should be applied to a dry film thickness between 0.3-0.4 mil. NOTE: This primer is designed for application over surface-treated metal or pretreatment coatings (See TS-117 Pre-Treatment Wash Primer). If used for dip or flow-coat application, the product suitability should be determined by the user.

Thin & clean up: Use only with factory recommended thinner. Thin if necessary with TS-620 Thinner. Tools and equipment may be cleaned with TS-620 Thinner or TS-610 Lacquer Thinner.

For use with most aerospace coatings, airplane paints and primers, aircraft finish, aluminum aircraft paint, aircraft paint colors, high performance aircraft coatings, performance aircraft coating, high performance aircraft, aircraft paint schemes.