Camo-Coat should be your first choice to achieve military aircraft and ground vehicle paint schemes because it is the exact authentic government spec non-reflective "drab" camouflage color, appearance and durability you want in tough MIL SPEC alkyd enamel. This is the very same stuff you expect to see on stealthy government aircraft, vehicles and equipment. Meets or exceeds government specification number TT-E-527 so you know your getting the real-deal! This lusterless high performance aircraft coating is suitable for use on the interior and exterior of all types of aircraft, parts and equipment. Acceptable for use on all aircraft, vehicles, guns, hunting stands, tools, machinery, etc. Adheres to ferrous and non-ferrous metals, fiberglass and wood. It is widely preferred as a camouflage aircraft coating and equipment enamel that withstands all types of weather conditions. The fully cured finish can withstand repeated washing and normal everyday abuse. It has proven its performance in various aircraft, military and marine maintenance fields. Withstands salt spray, impacts and resists rust. Excellent when used as a non-reflective interior or exterior drab aerospace enamel.

Stats: Covers 300-400 square feet per gallon on porous surfaces, up to 400 square feet on non porous surfaces. Dry to the touch in one hour. Tack free in 4-6 hours. Time to re-coat 12 hours. Dries hard in eight hours. Pot life: Not applicable. Compatible for electrostatic spray. Available in 200 stock aircraft paint colors. Custom colors available on request for an additional $10.00 per container. Available in quart, gallon and five gallon containers.

Recommended preparation: For best results remove old aircraft coatings, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or aircraft primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch fiberglass and aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any aircraft paints or primer.

Recommended primers: Wood-TS-664 Etching Primer. Fiberglass and aluminum materials-TS-117 Pre-Wash Primer in combination with TS-664 Etching Primer. Steel-TS-6390 Ever-Last Epoxy Primer. Best performance will be obtained when used over lacquer resisting primers including TS-664 Etching Primer and TS-6390 Ever-Last Epoxy Aircraft Primer. Recommend TS-1184 Zinc Chromate Primer for anti-corrosion protection.

Thin & clean up: Use only with factory recommended thinner, TS-101 Thinner. Clean all equipment thoroughly with TS-101 Thinner or for fast dry TS-605 Synthetic Thinner.

NOTE: Acceptable uses: aircraft paint schemes, aircraft finish, aircraft paint and coatings, aerospace coating, aircraft paint, aircraft paint colors, high performance aircraft coatings. For use with: Clear aircraft coatings, airplane paints and primers, airplane paint, aircraft primer, aircraft paint and coatings, aerospace coating, aircraft paint schemes, aircraft clear coating and high performance aircraft coatings.