.


Click to email us
Home Page
Full Product List
Chips
Thinner/Cleaners
Suggested Primers
Search Our Site
Tech Info/Resources
About Us
Contact Us
Shopping Cart
Color Charts
MSDS
Links
Privacy Policy
Corporate Policies


 

Continue Shopping
 

 
List: $129.95
Gallon Price:
$103.96

Buy Now

.
 
List: $629.95
5-Gallon Price:
$503.96

Buy Now


.
 

 
YellowLabel

TS-1184 Zinc Chromate Primer

 

View/Change/Complete your order:

 
A more subtle approach to the protective qualities of zinc than Zoiks! A rust-inhibiting Red Oxide Primer that is easy to spray and fast-setting. It is based on a zinc chromate-ferric oxide anti-corrosion system. This primer binds rust to the metal and seals out rust-causing air and water. It is intended for use as a protective primer for new or rusted metal surfaces. Designed primarily as a corrosion-inhibiting primer for use on aluminum aircraft, airborne equipment, machinery, ferrous and nonferrous metal surfaces before top coating with urethane, lacquer or enamel. It is zinc rich and contains a balanced composition of special pigments and phenolic modified resin providing good rust-inhibitive properties and blister resistance for better adhesion and metal protection.

Application: This product is at a spray viscosity designed for airless use: The primer should be allowed to dry a minimum of 2 hours before recoating with subsequent primers or topcoats. It should be applied to a dry film thickness between 0.3-0.4 mil. For non-aircraft, airborne equipment, or on iron or steel surfaces it should be applied to 0.6-0.8 mil dry film. It is satisfactory for application in a wide range of temperatures or humidity conditions.

NOTE: This primer is designed for spray application over surface-treated metal or pretreatment coatings. If used for dip or flow-coat application, the product suitability should be determined by the user. Color: Red Oxide. Product type: Zinc Chromate Rust-Inhibitive Primer. Physical characteristics: Viscosity: 20-25 sec. #2 Zahn. Dry to the touch: 5-10 minutes, tack free: 20 minutes, time to recoat: 30 minutes, dry hard: 30 minutes. Weight Solids: 58-60%. Practical coverage is 300-350 square feet per gallon @ approximately 2.0 mils dry. Stir thoroughly before use. Brush, roller, or spray. It should not be thinned unless absolutely necessary. Thin if necessary with TS 605 Thinner. Tools and equipment may be cleaned with TS 605 Synthetic Thinner or TS 610 Lacquer Thinner. Available in quart, gallon or five gallon cans.

 

 

 
 

 

Click on charts to enlarge
Base Color Chart

Wood Stain Colors
 
SuperFleck Chip Colors


 


 

 

Protect Your Investment

We recommend

VaporGuard - Concrete Moisture & Alkalinity Test Kit
Click Here

Click on charts to enlarge

Base Color Chart


Wood Stain Colors

.
SuperFleck Chip Colors