Aero-Lac is a premium fast drying, light weight nitrocellulose lacquer aircraft paint. An excellent choice as a protective coating for use on virtually all aircraft surfaces, equipment and tools. Favored for its beauty, light weight, ease of application and quick dry time. It has excellent depth, luster and durability and a wide variety of application possibilities. The very same government spec product specified by the military, government agencies and subcontractors. Conforms to government specification numbers TT-L-20 and TT-L-32. Aero-Lac high performance aircraft coating has been formulated as a premium finishing system that will look new for years. It provides beautiful, durable and long lasting protection to a wide variety of metal, wood, plastic, carbon fiber and composite aerospace surfaces. Nitrocellulose has been added for quick drying and ease of use. Our formula is resistant to grease, salt air, fungus, chemical fumes, gasoline and most oils. This product should not be used over bare metal. Best performance will be obtained when it is applied over metal surfaces properly pretreated and primed with lacquer resisting primer and a lacquer clear coat.

Stats: Covers 400-500 square feet per gallon. Dry to the touch in 5 minutes, tack free in 12 minutes, recoatable in 1 hour, dries hard in two hours. Pot life: Not applicable * Available in 200 stock aircraft paint colors. Custom colors available on request for an additional $10.00 per container. Available in low sheen, semi-gloss and gloss. Available in quart, gallon and five gallon containers.

Recommended preparation: For best results remove old aircraft coatings, loose scale, grease, oil and contaminates. Sand, grind, blast or power-wash prior to the application of any cleaner or aircraft primer. Steel: TS-5679 Phos-Pro Rust Converting Cleaner, etch fiberglass and aluminum with TS-695 Etching Cleaner. All surfaces must be thoroughly dry before the application of any aircraft paints or primer.

Recommended primers: Fiberglass and aluminum materials-TS-117 Pre-Wash Primer in combination with TS-664 Etching Primer. Steel-TS-6390 Ever-Last Epoxy Aircraft Primer. Best performance will be obtained when used over lacquer resisting primers including TS-664 Etching Primer and TS-6390 Ever-Last Epoxy Primer. Recommend TS-1184 Zinc Chromate Primer for anti-corrosion protection.

Thin & clean up: Use only with factory recommended thinner, TS-610 Lacquer Thinner. Clean all equipment thoroughly with TS-610 Lacquer Thinner.

NOTE: Acceptable uses: aircraft paint schemes, aircraft finish, aircraft paint and coatings, aerospace coating, aircraft paint, aircraft paint colors, high performance aircraft coatings. For use with: Clear aircraft coatings, airplane paints and primers, airplane paint, aircraft primer, aircraft paint and coatings, aerospace coating, aircraft paint schemes, aircraft clear coating and high performance aircraft coatings.