Sure you say – but will it last? You bet! You can expect more than ten years of maintenance free service when you choose Life Guard Silicone-Epoxy. Unlike typical epoxy it has a silicone alkyd base fortified with epoxy-ester which produces unequaled adhesion, superior UV resistance and tremendous flexibility which prevents cracking, peeling and seepage. It is economical and easy to use! Anyone that can roll up their sleeves can apply it without the hassle of mixing multiple components together or hassles of limited pot life that goes with it. It is less likely to chalk, fade or yellow like old fashioned two-component epoxy making it a favorite of D-I-Y and professional pool refinishers.

It is a self leveling formula that is self priming on concrete, masonry, steel and wood. Hardness, scuff resistance and chemical resistance are comparable to two-component epoxy – but it is a whole lot easier to use. It prevents seepage of water in pools and ponds. Resists saltwater, chalking, chipping and peeling, alkali (from concrete or plaster), swimming pool chemicals, growth of algae and molds, minimizes collection of iron and dirt and is easy to clean. It is economical to use because it spreads two times further than competing products. May be brushed, rolled or sprayed and it cleans up easily. Allows cold weather applications down to 30F.

• Lasts longer because it is a silicone epoxy-ester resin blend.
• Produces a finish that remains both hard and flexible at the same.
• Stops the movement of water and gasses.
• Less likely to yellow, fade or chalk.
• Saves you money because it covers 2X further than typical epoxy.
• Self leveling formula leaves no brush or roller marks.
• Withstands temperatures from -60F to over 400F, impacts to 500 PSI
• Allows low temperature applications down to 30F.
• Lead free, low odor and non-toxic formula.
• Produces an unusually beautiful finish available in 100 colors plus clear.

Stats: Covers 425-450 square feet per gallon when brushed or rolled and 600+ square feet when sprayed on non porous surfaces. Dry to the touch in 2-4 hours. Pot life: Not applicable. Very high in solid content so it will require dilution in most applications. Custom colors available on request for an additional $10.00 per gallon. Available in one gallon and five gallon containers satin and gloss finishes.

Recommended preparation: See application instruction sheet for details.

Recommended primers: Recommend TS-664 primer on Gunnite. Self priming on well prepared concrete, masonry, wood and porous tile in two or more coats. NEW CONCRETE: Thin first coat 20-25% with TS-101 Thinner then apply second and third coats undiluted. Revolution Clear may be applied as a finish coat, however, it’s use is not required. Recommended primers: TS-6390 Ever-Last Epoxy Primer or TS-664 Etching Primer.

Thin & clean up: Use only with factory recommended thinner, TS-101 Thinner. Clean all equipment thoroughly with TS-101 Thinner or Acetone.

NOTE: Our performance warranty is not a guaranty of color fastness. Please understand that pool chemicals and UV rays combine to reduce the effectiveness of even the highest quality resins, colorants and anti-fading ingredients. Dark colors fade sooner than lighter colors. When dark colors are desired, we recommend ordering a shade or two darker with the understanding that colors will lighten with time.